Isi Shaft Steel Forging
Nkọwa ngwaahịa:
Ebe Mmalite: Shanxi
Aha ika: DHDZ
Asambodo: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Ọnụ ahịa kacha nta: 1 ibe
Nkwado nnabata: +/- 0.5mm
Ngwungwu njem: Katọn nwere pallet osisi
Nkwupụta ule: MTC, HT, UT, MPT, mkpesa akụkụ, Nlele anya, EN10204-3.1, EN10204-3.2
Ahịa: Negotiable
Ike mmepụta: 1000 ton / afọ
| Ihe eji eme ihe | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| A182 F51 | ≤ 0.030 | 2.0 | ≤ 0.030 | ≤ 0.020 | <0.80 | 21-23 | 4.5-6.5 | 2.50-3.50 | / | 0.20-0.24 |
| A105 | 0.19-0.23 | 0.9-1.05 | 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| LF2 | 0.19-0.23 | 0.9-1.05 | 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| 42CrMo4 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | / | / |
| C45 | 0.42-0.50 | 0.5-0.8 | 0.035 | 0.035 | 0.17-0.37 | ≤ 0.25 | <0.5 | / | ≤ 0.30 | / |
| Ihe eji arụ ọrụ | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Ọkwa | Mmetụta ike | HBW |
| 4130 | Ф10 | 655 | 517 | 18 | ：35 | V | ≥20J (-60℃) | 197-23 |
| A182 F51 | / | ≥620 | ≥450 | ≥25 | 45 | V | ≥45J | / |
| A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
| LF2 | / | 485-655 | ≥250 | ≥22 | ≥30 | V | ≥27J (-29℃) | 143-187 |
| 42CrMo4 | Ф10 | 1080 | 930 | 25 | 45 | V | ≥25J (-60℃) | <217 |
| C45 | Ф12.5 | ≥540 | ≥240 | ≥16 | / | V | / | / |
Usoro mmepụta:
Akpụkpọ anụ nchara nchara nchara n'ime ụlọ nkwakọba ihe (nnwale ọdịnaya kemịkalụ) → Ịcha → Heat (Nnwale okpomọkụ) → Ọgwụgwọ ọkụ mgbe ịmechara (nnwale ọkụ ọkụ) Wepu ọkụ (nyocha oghere) → Machining → Inspection(UT) ,MT, Visal diamention, hardness)→ QT→ Nyocha (UT, mechanical properties, hardness, grain size) → Mechaa machining→ Nyocha (akụkụ) → mbukota na akara (stampụ ígwè, akara) → Nchekwa Mbupu
Uru:
Njirimara igwe dị mma,
Nkwenye akụkụ dị oke oke,
Jikwaa usoro mmepụta nke ọma,
Ngwá ọrụ nrụpụta dị elu na ngwaọrụ nyocha,
Ọkachamara teknụzụ mara mma,
Mepụta akụkụ dị iche iche dabere na ihe ndị ahịa chọrọ,
Lezienụ anya na nchekwa ngwugwu,
Ogo zuru oke ọrụ.
Ụlọ ọrụ ngwa:
Ụlọ ọrụ ụgbọ mmiri, ụlọ ọrụ ikuku, ụlọ ọrụ ọgwụ, ụlọ ọrụ modul, ụlọ ọrụ akwa akwa, ụlọ ọrụ ngwaọrụ ahụike, ụlọ ọrụ eletrọnịkị, ụlọ ọrụ petrochemicals, wdg.
