Lap Joint ForgedUmenzi weFlange eTshayina

Lap JointForged Flanges ManufacturereShanxi naseShanghai, eTshayina
I-Lap Joint Pipe Flanges. Iiflange zemibhobho edibeneyo ye-Lap isilayidi ngokuthe ngqo phezu kombhobho kwaye zidla ngokusetyenziswa ngokufakela isiphelo se-stub. Umbhobho udla ngokudityaniswa ukuya kwiStub End kwaye iLap Joint pipe flange ikhululekile ukujikeleza kwisiphelo sestub. ... Ubukhulu obungaphezulu kwe-24" buveliswa njengeekhonkco zokutyibilika kwimilinganiselo.

Ubungakanani
Ubungakanani beFlange edibeneyo yeLap: 1/2"-160"
DN10~DN4000

Ukujongana
I-Flat Face Ubuso Obugcweleyo (FF), Ubuso Obuphakanyisiweyo (RF), Ubuso Bobudoda(M), Ubuso Bobufazi (FM), Ubuso Bolwimi (T), Ubuso BeGroove (G), Ubuso Obuhlangeneyo BeRingi ( RTJ/ RJ ).

Umphezulu / Unyango loKutyabeka
I-Anti-rust Paint, i-Oil Black Paint, i-Yellow Transparent, i-Zinc Plated, i-Cold and Hot Dip Galvanized, i-Golden Varnish Finish.

IiFlanges zeDHDZ ezisemgangathweni zibonelela:

Umgangatho waseMelika
I-ANSI B16.5
Iklasi yoxinzelelo: 150 ~ 1200
Ubungakanani: 1/2"-24"

I-ASME B16.5
Uxinzelelo lweClass 150 ~ 1200
Ubungakanani: 1/2"-24"

I-ASME B16.47A
Uxinzelelo lweClass 150 ~ 900
Ubungakanani: 1/2"-24"

I-ASME B16.47B
Uxinzelelo lweKlasi 75 ~ 900
Ubungakanani: 26 "-60"

I-ANSI B16.1
IManyano yaseOrifice B16.36
I-MSS-SP-44
API
AWWA
Uhlobo
Intamo yeWelding, Slip on, Threaded, Lap joint,
I-Socket weld , Imfama , i-Orifice, i-Spectacle blind

Umgangatho waseJamani
I-DIN
Uxinzelelo PN6~PN400
Ubungakanani be-DN10~DN4000
Uhlobo
I-DIN 2527-Imfama; PN~PN100
I-DIN 2566-Screwed: PN10 kunye ne-PN16
DIN 2573 PN6
I-DIN 2576 PN10
I-DIN 2627 PN400
I-DIN 2628 PN250
I-DIN 2629 PN320
I-DIN 2630 PN1 kunye ne-PN2.5
I-DIN 2631 PN6
I-DIN 2632 PN10
I-DIN 2633 PN16
I-DIN 2634 PN25
I-DIN 2635 PN40
I-DIN 2636 PN64
I-DIN 2637 PN100
I-DIN 2638 PN160
I-DIN 2641 PN6
I-DIN 2642 PN10
I-DIN 2655 PN25
I-DIN 2656 PN40

Umgangatho weAfrika
Umgangatho
SABS 1123
Uxinzelelo 250kpa ~ 6400kpa
Ubungakanani: DN10 ~ DN3600
Uhlobo
Imfama, iPlate, iWelding intamo, ikhululekile,
Okudityanisiweyo, Slip on

Umgangatho waseOstreliya
Umgangatho
AS 2129
Itheyibhile: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Ubungakanani: DN15 ~ DN3000

AS 4087
Uxinzelelo lwe-PN16~PN35
Ubungakanani: DN50 ~ DN1200
Uhlobo
Imfama, iPlate, iWelding neck, Boss

Umgangatho waseKhanada
Umgangatho
CSA Z245.12
Uxinzelelo PN20~PN400
Ubungakanani: NPS 1/2"-60"

Umgangatho waseJapan
Umgangatho
JIS B2220
Uxinzelelo 5K ~30K
Ubungakanani: DN10 ~ DN1500
Uhlobo
Tyibilika epleyitini, Slip kwi hubbed, Socket welding, Welding neck, Lap joint, Threaded, Blind,Integral

Umgangatho waseYurophu
Umgangatho
EN 1092-1
Uxinzelelo PN6~PN100
Ubungakanani: DN10 ~ DN4000
Uhlobo
Ipleyiti, ipleyiti ekhululekileyo, imfama, intamo yeWelding, isiliphu esizikiweyo, sifakwe umsonto

Umgangatho waseBritani
Umgangatho
BS 4504
Uxinzelelo lwe-PN2.5~PN40
Ubungakanani: DN10 ~ DN4000
BS 10
Itheyibhile: T/A, T/D, T/E,T/F, T/H
Uxinzelelo lwe-PN2.5~PN40
Ubungakanani: 1/2 ~ 48”
Uhlobo
Ipleyiti, ikhulule, iWelding intamo, imfama,
Isiliphu esixhonyiweyo, sifakwe kwi-Hubbed threaded
Okudityanisiweyo , ePlain

Umgangatho wesiFrentshi
Umgangatho
NFE 29203
Uxinzelelo PN2.5~PN420
Ubungakanani: DN10 ~ DN600
Uhlobo
Imfama, iPlate, iWelding intamo, ikhululekile,
Okudityanisiweyo, Slip on

Umgangatho waseItali
Umgangatho
I-UNI 2276-2278
Uxinzelelo lwe-PN6~PN40
Ubungakanani: DN10 ~ DN600
Uhlobo
Imfama, iPlate, iWelding intamo, ikhululekile,
Okudityanisiweyo, Slip on

Umgangatho waseRashiya
Umgangatho
IGOST 1281
Uxinzelelo PN15~PN2000
Ubungakanani: DN10 ~ DN2400
Uhlobo
Imfama, iPlate, iWelding intamo, ikhululekile,
Okudityanisiweyo, Slip on

Umgangatho waseTshayina
Umgangatho
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM10
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Uxinzelelo 0.25MPa ~ 10Mpa
Ubungakanani: DN10 ~ DN1200
Uhlobo
Imfama, iPlate, iWelding intamo, iLap joint, Slip on,
Inentambo, intamo ende yokuwelda
I-MSS-SP-44
API
AWWA
I-DIN
EN 1092-1
BS4504
IGOST
AFNOR NF EN 1759-1
NEF
I-UNI
I-JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Izinto ezisetyenziswa yi-DHDZ:
I-CARBON STEEL - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS Steel - ASTM/ASME A182 Gr F304 , A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, F316L, F316L, A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L
I-Duplex - F-51
I-ALLOY Steel: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Umenzi, umthengisi kunye nomthengisi we-ASME / ANSI B16.5 carbon steel Weld Neck Flanges, insimbi engenasici Weld Neck Flange, i-alloy steel Weld Neck Flange, ASTM A105 / A105N, A350 LF1, LF2 CL1 / CL2, A694 F42, F64, F F50, F52, F56, F60, F70, A516.60,65,70. WNRF Flanges Manufacturer e Shanxi.

I-A182 Gr F304 i-G32 I-A182 G34L ye-A182 I-A182 G316 I-A182 I-A182 ye-GR F32 A182 Gr F321H iLap Joint Forged Flange, A182 Gr F347 Lap Joint Forged Flange, ASTM A182 F5 ILap Joint Forged Flange umboneleli, ASTM A182 F9 F9 iLap Joint Forged Flange, Lap Joint Forged Flange Exporter In Shanxi, ASTM11 Lap supplier I-ASTM A182 F12 I-Lap Joint Forged Flange, i-ASTM A182 F22 i-Lap Joint Forged Flange, i-ASTM A182 F91 i-Lap Joint Forged Flange, i-ASTM A350 LF2 i-Lap i-Flange edibeneyo, i-ASTM A350 LF3 i-Lap edibeneyo i-Flange ye-Flange, i-ASTM6 i-A350 ye-Flange ye-Flange kunye neShanghai.

Thina DHDZ sivelisa iiflange ezibunjiweyo ezihlangabezana nomgangatho wehlabathi jikelele: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, njl. Thina DHDZ sivelisa 75 lbs, 150lbs , I-300lbs, i-600lbs, i-900lbs, i-1500lbs, i-2500lbs, i-PN6, i-PN10, i-PN25, i-PN40, i-PN63, i-PN64, i-PN100, i-GOST 12820 kunye ne-GOST 12821, i-PPA, i-PPA1, i-PPA1, i-PPA1 PN4 .0MPA, SANS1123 okanye SABS 1123, 600kpa, 1000kpa, 1600kpa, 2500kpa, 4000kpa iireyithingi zeflange ngokommiselo womthengi ngamnye. I-Weld Neck Flange Manufacturer e-China-Biza :86-21-52859349 Thumela i-imeyile:dhdz@shdhforging.com

Iindidi zeFlanges: WN, Threaded, LJ, SW, SO, Blind, LWN,
● Weld Neck Forged Flanges
● IiFlanges ezenziwe ngemisonto
● I-Lap Joint Forged Flange
● I-Socket Weld Forged Flange
● Ukutyibilika kwiFlenji efojiweyo
● IFlenge elenziwe ngeemfama
● Long Weld Neck Forged Flange
● I-Orifice Forged Flanges
● IiFlentshi ezenziweyo zeSpectacle
● I-Flenge Eyenziwe Ngokukhululekileyo
● I-Plate Flange
● Flange Flange
● I-Oval Forged Flange
● Wind Power Flange
● ForgedTube Sheet
● I-CUSTOM iFlenge elenziweyo