Produsén Flanges Leupas di Shanxi sareng Shanghai, Cina

The flange leupas ieu sleeved dina tungtung pipe ku ngagunakeun kerah, cingcin baja, jsb, sarta flange leupas bisa dipindahkeun dina tungtung pipe. Cincin baja atanapi kerah mangrupikeun pameunteu anu nyegel, sareng flanges anu leupas tindakan pikeun niiskeunana. Ieu bisa ditempo yén flange leupas teu di kontak jeung sedeng alatan keur diblokir ku ring baja atawa kerah. Kusabab flange kasebut movable sarta henteu langsung disambungkeun kana pipa, mangka disebut flange leupas. Aya istilah sejen disebut flange lapped.

Ukuran

Ukuran Flange Loose: 1/2"-160"

DN10~DN4000

Nyanghareupan

raray datar raray pinuh (FF), raray diangkat (RF), raray jalu (M), raray bikang (FM), raray létah (T), raray alur (G), ring joint raray ( RTJ / RJ )

Perlakuan permukaan / palapis

Cat anti karat, Cat Minyak Hideung, Konéng Transparan, Séng Plated, Tiis sareng Hot Dip Galvanized, Golden Varnish Finish

Standar Internasional Flanges DHDZ nyadiakeun:

Standar Amérika
ANSI B16.5
Kelas tekanan: 150 ~ 1200
Ukuran: 1/2"-24"

ASME B16.5
Tekanan Kelas 150~1200
Ukuran: 1/2"-24"

ASME B16.47A
Kelas tekanan 150~900
Ukuran: 1/2"-24"

ASME B16.47B
Tekanan Kelas 75~900
Ukuran: 26"-60"

ANSI B16.1
Uni Orifice B16.36
MSS-SP-44
API
AWWA
Tipe
Welding neck, Slip on, Threaded, Lap joint,
Socket weld, Buta, Orifice, Buta Tontonan

Standar Jerman
DIN
Tekanan PN6~PN400
Ukuran DN10~DN4000
Tipe
DIN 2527-Buta; PN~PN100
DIN 2566-Screwed: PN10 jeung PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 jeung PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Standar Afrika
Standar
SABS 1123
Tekanan 250kpa ~ 6400kpa
Ukuran: DN10 ~ DN3600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Standar Australia
Standar
AS 2129
Méja: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Ukuran: DN15 ~ DN3000

AS 4087
Tekanan PN16~PN35
Ukuran: DN50 ~ DN1200
Tipe
Buta, Piring, Welding beuheung, Bos ??

Standar Kanada
Standar
CSA Z245.12
Tekanan PN20 ~ PN400
Ukuran: NPS 1/2"-60"

Standar Jepang
Standar
JIS B2220
Tekanan 5K ~ 30K
Ukuran: DN10 ~ DN1500
Tipe
Slip on plate, Slip on hubbed, Socket welding, Las beuheung, Lap joint, Threaded, Buta, Integral

Standar Éropa
Standar
EN 1092-1
Tekanan PN6~PN100
Ukuran: DN10 ~ DN4000
Tipe
Piring, piring leupas, Buta, beuheung las, Hubbed slip on, Hubbed threaded

Standar Britania
Standar
BS 4504
Tekanan PN2.5 ~ PN40
Ukuran: DN10 ~ DN4000

BS 10
Méja: T/A, T/D, T/E, T/F, T/H
Tekanan PN2.5 ~ PN40
Ukuran: 1/2-48"
Tipe
Piring, Longgar, Welding beuheung, Buta,
Hubbed slip on, Hubbed threaded
Integral, polos

Standar Perancis
Standar
NFE 29203
Tekanan PN2.5 ~ PN420
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Italia Standar
Standar
UNI 2276-2278
Tekanan PN6~PN40
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Rusia Standar
Standar
GOST 1281
Tekanan PN15~PN2000
Ukuran: DN10 ~ DN2400
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Standar Cina
Standar
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB / T11694-94, GB / T3766-1996, GB / T11693-94, GB10746-89, GB / T4450-1995, GB / T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406
Tekanan 0.25MPa ~ 10Mpa
Ukuran: DN10 ~ DN1200
Tipe
Buta, Piring, Welding beuheung, Lap joint, Slip on,
Threaded, beuheung las panjang
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406

Bahan dipaké ku DHDZ:

1. BAJA KARBON - ASTM / ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36

2. STAINLESS STEEL - ASTM / ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A182 Gr F316L A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L

3. Duplex - F-51

4. BAJA PADUHAN: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Pabrikan, eksportir & supplier ASME / ANSI B16.5 baja karbon Flanges Leupas, stainless steel Leupas Flange, alloy baja Leupas Flange, ASTM A105 / A105N, A350 LF1, LF2 CL1 / CL2, A694 F42, F46, F48, F50, F52 , F56, F60, F70, A516.60,65,70. Produsén Flanges Leupas di Shanxi

A182 Gr F304 Leupas Ngajalin Flange, A182 Gr F 304L Leupas Ngajalin Flange, A182 Gr F316 Leupas Ngajalin Flange, A182 Gr F316L Leupas Ngajalin Flange, A182 Gr F316Ti leupas Ngajalin Flange, F3212 Flange, F321 Leupas ngajalin Flange , A182 Gr F347 Leupas Ngajalin Flange, ASTM A182 F5 Leupas Ngajalin Flange supplier, ASTM A182 F9 Leupas Ngajalin Flange, Leupas Ngajalin Flange Éksportir Di Shanxi, ASTM A182 F11 Leupas Ngajalin Flange suppliers, ASTM A182 F12 Leupas A Ngajalin Flange Pikeun, ASTM A182 F12 Leupas A ngajalin Flange Flange, ASTM A182 F91 Flange Tempa Leupas, Flange Tempa ASTM A350 LF2, Flange Tempa Leupas ASTM A350 LF3, Flange Tempa Leupas ASTM A350 LF6, Pabrikan Flange Tempa Leupas ASTM A350 LF6 di Shanxi sareng Shanghai

Kami DHDZ ngadamel flanges palsu anu nyumponan standar kualitas internasional:

DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, jsb Urang DHDZ pabrik 75 lbs, 150lbs, 300lbs, 600lbs, 900lbs, 1500lbs, 1500lbs PN6. , 1600kpa, 2500kpa, 4000kpa ratings flange sakumaha per spésifikasi purchaser urang.

Pabrikan Flange Leupas di Cina -Telepon: 86-21-52859349

Kirim Surat:dhdz@shdhforging.com

Jenis Flange:WN, Threaded, LJ, SW, SO, Buta, LWN,

● Weld beuheung Flanges ngajalin

● Threaded ngajalin Flanges

● Lap Joint ngajalin Flange

● stop kontak Weld ngajalin Flange

● Slip Dina ngajalin Flange

● Buta ngajalin Flange

● Long Weld beuheung ngajalin Flange

● Orifice ngajalin Flanges

● Tontonan ngajalin Flanges

● Leupas ngajalin Flange

● Plate Flange

● Datar Flange

● Oval ngajalin Flange

● Angin Power Flange

● ForgedTube Lambaran

● Adat ngajalin Flange