Huka Hukarere
Taipitopito Hua:
Wāhi Taketake: Shanxi
Ingoa Waitohu: DHDZ
Tiwhikete: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Ripoata Whakamatau: MTC, HT, UT, MPT, Ripoata Ahu, Whakamatau Ataata, EN10204-3.1, EN10204-3.2
Rahi ota iti: 1 wahi
Te Roughness Mata Tuhitaka: 0.63-0.16μm
Te ahua o te ahua: Porowhita
Mōkī Kawe: Puhi Plywood
Utu: Ka taea te whiriwhiri
Te kaha o te whakaputa: 100PCS / Marama
Huānga rauemi | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
A182 F53 | ≤ 0.030 | ≤ 1.20 | ≤ 0.035 | <0.020 | <0.80 | 24-26 | 6.0-8.0 | 3-5 | <0.50 | 0.24-0.32 |
A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
F6Mn | ≤ 0.05 | 1.0 | ≤ 0.03 | ≤0.03 | ≤0.60 | 11-14 | 3.5-5.5 | 0.5-1 | / | / |
42CrMo4 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | / | / |
34CrNiMo6 | 0.3-0.38 | 0.5-0.8 | ≤ 0.025 | ≤ 0.035 | ≤ 0.4 | 1.3-1.7 | 1.3-1.7 | 0.15-0.3 | / | / |
09G2S ( 09Г2C ) | ≤ 0.12 | 1.3-1.7 | ≤ 0.03 | ≤ 0.035 | 0.5-0.8 | ≤ 0.3 | ≤ 0.3 | / | ≤ 0.3 | ≤ 0.008 |
ASTMA36 | ≤ 0.26 | 0.6-0.9 | ≤ 0.040 | ≤ 0.050 | ≤ 0.40 | / | / | / | ≥0.20 | / |
Nga taonga miihini | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Kaniwha | Te kaha o te paanga | HBW |
4130 | Ф10 | >655 | >517 | >18 | >35 | V | ≥20J(-60 ℃) | 197-23 |
A182 F53 | / | ≥800 | ≥550 | ≥15 | / | V | / | <310 |
A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
F6Mn | / | ≥790 | ≥620 | ≥15 | ≥45 | V | / | ≤295 |
42CrMo4 | Ф10 | >1080 | >930 | >25 | >45 | V | ≥25J(-60 ℃) | <217 |
34CrNiMo6 | Ф12.5 | ≥785 | / | ≥11 | ≥30 | V | ≥71J | / |
09G2S ( 09Г2C ) | Ф25 | 900-1050 | ≥700 | ≥10 | ≥50 | V | / | / |
ASTMA36 | / | 400-550 | ≥250 | ≥23 | / | V | / | / |
Nga Tikanga Whakaputa:
Te whakahaere i te kounga o te rere o te tukanga: Raw material steel ingot ki roto i te whare putunga(whakamatautauria te ihirangi matū) → Tapahi → Whakawera(Whakamātautau pāmahana Umu) → Te whakamahana wera i muri i te hanga (Whakamātautau i te wera o te oumu) Tukuna te oumu(tirotiro tuwhera)→ Miihini → Tirotiro(UT ,MT, Te ahua o te tirohanga, te pakeke) → QT → Tirotiro (UT, nga taonga miihini, te pakeke, te rahi o te witi) → Whakaotihia te miihini → Te tirotiro (ahua) → Te Taapaki me te Tohu (te hiri rino, te tohu) → Te Tukunga Rokiroki
Painga:
He pai nga ahuatanga miihini,
Whakaaetanga ahu-nui,
Whakahaerehia nga tikanga whakaputa,
Nga taputapu hanga matatau me nga taputapu tirotiro,
He tangata hangarau tino pai,
Te whakaputa i nga waahanga rereke i runga i nga whakaritenga a te kaihoko,
Kia tupato ki te tiaki i te kete,
Kounga ratonga katoa.
Ahumahi Tono:
Te tangohanga hinu me te hau, te whakaputa hiko hau, te miihini whakarewa, te miihini miihini, te mahi hanga kaipuke, nga oko pehanga, te mana karihi, aha atu.