Mowhiti Nui Hawhe-mowhiti
Taipitopito Hua:
Wāhi Taketake: Shanxi
Ingoa Waitohu: DHDZ
Tiwhikete: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Rahi ota iti:1 wahi
Awhe rahi: Max OD4000mm
Mōkī Kawe: Kehe Plywood
Ripoata Whakamatau: MTC, HT, UT, MPT, Ripoata Ahu, Whakamatau Ataata, EN10204-3.1, EN10204-3.2
Utu: Ka taea te whiriwhiri
Te kaha o te whakaputa: 100 PCS / Marama
Huānga rauemi | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
A182 F51 | ≤ 0.030 | 2.0 | ≤ 0.030 | ≤ 0.020 | <0.80 | 21-23 | 4.5-6.5 | 2.50-3.50 | / | 0.20-0.24 |
A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
LF2 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
42CrMo4 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | / | / |
35NiCrMoV12-5 | 0.30-0.40 | 0.4-0.7 | ≤ 0.015 | ≤ 0.015 | ≤ 0.35 | 1.0-1.4 | 2.5-3.5 | 0.35-0.65 | / | / |
20MnMo | 0.17-0.23 | 1.1-1.4 | ≤0.025 | ≤0.015 | 0.17-0.37 | ≤0.030 | ≤0.030 | 0.20-0.35 | / | / |
Nga taonga miihini | Dia.(mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Kaniwha | Te kaha o te paanga | HBW |
A182 F51 | / | ≥620 | ≥450 | ≥25 | >45 | V | ≥45J | / |
A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
LF2 | / | 485-655 | ≥250 | ≥22 | ≥30 | V | ≥27J(-29 ℃) | 143-187 |
42CrMo4 | Ф10 | >1080 | >930 | >25 | >45 | V | ≥25J(-60 ℃) | <217 |
35NiCrMoV12-5 | Ф12.5 | ≥1100 | ≥850 | ≥8.0 | / | V | / | / |
20MnMo | Ф10 | ≥605 | ≥475 | ≥25 | / | V | ≥180 | / |
Nga Tikanga Whakaputa:
Te whakahaere i te kounga rere o te tukanga: Raw material steel ingot ki roto i te whare putunga(whakamatautauria te ihirangi matū) → Te tapahi → Whakawera(Whakamātautau pāmahana umu) → Te maimoatanga wera i muri i te hanga (Whakamātautau pāmahana oumu) Tukuna te oumu(tirotiro tuwhera)→ Miihini → Tirotiro(UT ,MT, Te ahua o te tirohanga, te pakeke) → QT → Tirotiro (UT, nga taonga miihini, te pakeke, te rahi o te witi) → Whakaotihia te miihini → Te tirotiro (ahua) → Te Taapaki me te Tohu (te hiri rino, te tohu) → Te Tukunga Rokiroki
Painga:
He pai nga ahuatanga miihini,
Whakaaetanga ahu-nui,
Whakahaerehia nga tikanga whakaputa,
Nga taputapu hanga matatau me nga taputapu tirotiro,
He tangata hangarau tino pai,
Te whakaputa i nga waahanga rereke i runga i nga whakaritenga a te kaihoko,
Kia tupato ki te tiaki i te kete,
Kounga ratonga katoa.
Ahumahi Tono:
Te ahumahi matū, te ahumahi hoia, te ahumahi miihini, te ahumahi miihini, nga papaa o uta, te tukatuka waahanga, te umanga miihini, nga taputapu rongoa, aha atu.