Lap JointGeschmiedFlange Fabrikant an China

Lap JointGeschmiedFlanges Hiersteller zu Shanxi a Shanghai, China
Lap Joint Pipe Flanges. Lap Joint Päif Flanges rutschen direkt iwwer d'Päif a gi meeschtens mat Stëbsend Armaturen benotzt. E Päif gëtt normalerweis un de Stubbend geschweest an de Lap Joint Päifflens ass fräi fir ronderëm de Stubbend ze rotéieren. ... Gréissten iwwer 24" ginn als Ronn Gelenker produzéiert fir op Dimensiounen ze rutschen.

Gréisst
Lap Joint Flange Gréisst: 1/2"-160"
DN10~DN4000

Gesicht
Flat Face Full Face (FF), Raised Face (RF), Männlech Gesiicht (M), Weiblech Gesiicht (FM), Zong Face (T), Groove Face (G), Ring Joint Face (RTJ / RJ).

Surface / Coating Behandlung
Anti-Rust Lack, Ueleg Schwaarz Lack, Giel Transparent, Zénk Plated, Kale an Hot Dip Galvanized, Golden Lack Finish.

International Standard Flanges DHDZ bitt:

American Standard
ANSI B16.5
Drock Klass: 150 ~ 1200
Gréisst: 1/2"-24"

ASME B16.5
Drock Klass 150 ~ 1200
Gréisst: 1/2"-24"

ASME B16.47A
Drock Klass 150 ~ 900
Gréisst: 1/2"-24"

ASME B16.47B
Drock Klass 75 ~ 900
Gréisst: 26"-60"

ANSI B16.1
Orifice Unioun B16.36
MSS-SP-44
API
AWWA
Typ
Schweißenhals, Slip on, Threaded, Lap joint ,
Socket Weld, Blind, Orifice, Spektakelblann

Däitsch Standard
DIN
Drock PN6~PN400
Gréisst DN10 ~ DN4000
Typ
DIN 2527-Blind; PN~PN100
DIN 2566-Schrauwen: PN10 an PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 und PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

afrikanesch Standard
Standard
SABS 1123
Drock 250kpa~6400kpa
Gréisst: DN10 ~ DN3600
Typ
Jalousie, Plack, Schweißhals, Loose,
Integral, Rutsch op

Australian Standard
Standard
AS 2129
Dësch: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Gréisst: DN15 ~ DN3000

AS 4087
Drock PN16~PN35
Gréisst: DN50 ~ DN1200
Typ
Jalousie, Plack, Schweess Hals, Boss

kanadesche Standard
Standard
CSA Z245.12
Drock PN20~PN400
Gréisst: NPS 1/2"-60"

Japanesch Standard
Standard
JIS B2220
Drock 5K ~ 30K
Gréisst: DN10 ~ DN1500
Typ
Rutsch op Plack, Rutsch op Hub, Socket Schweißen, Schweißhals, Lap Joint, Threaded, Blind, Integral

Europäesche Standard
Standard
EN 1092-1
Drock PN6~PN100
Gréisst: DN10 ~ DN4000
Typ
Plack, Lose Plack, Jalousie, Schweißhals, Hubbed Rutsch op, Hubbed threaded

britesch Standard
Standard
BS 4504 Eng
Drock PN2.5~PN40
Gréisst: DN10 ~ DN4000
BS 10
Dësch: T/A, T/D, T/E, T/F, T/H
Drock PN2.5~PN40
Gréisst: 1/2 ~ 48"
Typ
Plack, Loose, Schweess Hals, Blann,
Hubbed Rutsch op, Hubbed threaded
Integral, Einfach

Franséisch Standard
Standard
NFE 29203
Drock PN2.5~PN420
Gréisst: DN10 ~ DN600
Typ
Jalousie, Plack, Schweißhals, Loose,
Integral, Rutsch op

Italien Standard
Standard
UNI 2276-2278
Drock PN6~PN40
Gréisst: DN10 ~ DN600
Typ
Jalousie, Plack, Schweißhals, Loose,
Integral, Rutsch op

Russland Standard
Standard
GOST 1281
Drock PN15~PN2000
Gréisst: DN10 ~ DN2400
Typ
Jalousie, Plack, Schweißhals, Loose,
Integral, Rutsch op

Chinese Standard
Standard
GB9112-2000
GB9113-2000 ~ GB9123-2000
JB81-94–JB86-94, JB/T79-94–JB/T86-94
JB4700-2000–JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1012-81
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Drock 0.25MPa~10Mpa
Gréisst: DN10 ~ DN1200
Typ
Jalousie, Plack, Schweess Hals, Lap Gelenk, Rutsch op,
Threaded, Lange Schweesshals
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Material benotzt vun DHDZ:
CARBON STEEL - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM/ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A1682 Gr F318N, A162N, F318N Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L
Duplex - F-51
ALLOY STEEL: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Fabrikant, Exportateur & Fournisseur vun ASME / ANSI B16.5 Kuelestoff Stol Weld Neck Flanges, STAINLESS Stol Weld Neck Flange, Legierung Stol Weld Neck Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46, F48 F50, F52, F56, F60, F70, A516.60,65,70. WNRF Flanges Hiersteller zu Shanxi.

A182 Gr F304 Lap Joint Forged Flange, A182 Gr F 304L Lap Joint Forged Flange, A182 Gr F316 Lap Joint Forged Flange, A182 Gr F316L Lap Joint Forged Flange Fabrikant, A182 Gr F316Ti Lap Joint A182 Forged Lap, Gr. A182 Gr F321H Lap Joint Forged Flange, A182 Gr F347 Lap Joint Forged Flange, ASTM A182 F5 Lap Joint Forged Flange Supplier, ASTM A182 F9 Lap Joint Forged Flange, Lap Joint Forged Flange Exporter In Shanxi, ASTM A182 F11 Lap Flanges ASTM A182 F12 Lap Joint geschmied Flange, ASTM A182 F22 Lap Joint Forged Flange, ASTM A182 F91 Lap Joint Forged Flange, ASTM A350 LF2 Lap Joint Forged Flange, ASTM A350 LF3 Lap Joint Forged Flange, ASTM A350 LF6 Lap Joint Forged Flangen a Shanghai Manxiufac Forged Flangen.

Mir DHDZ fabrizéieren geschmied Flanges déi den internationale Qualitéitsnorm entspriechen: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, etc. Mir DHDZ fabrizéiert 75 lbs, 150lbs , 300lbs, 600lbs, 900lbs, 1500lbs, 2500lbs, PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 a GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN3, SABS10MPA PN3, SABS10MPA PN3, SABS10MPA PN3, SABS10MPA PN3, SABS11MPA 3 600kpa, 1000kpa, 1600kpa, 2500kpa, 4000kpa Flange Bewäertungen no der Spezifizéierung vum Keefer. Weld Neck Flange Fabrikant an China - Call: 86-21-52859349 Schécken Mail:dhdz@shdhforging.com

Aarte vu Flanges: WN, Threaded, LJ, SW, SO, Blind, LWN,
● Weld Neck Forged Flanges
● Threaded Forged Flanges
● Lap Joint Forged Flange
● Socket Weld Forged Flange
● Slip On Forged Flange
● Blind Forged Flange
● Laang Weld Neck Forged Flange
● Orifice Forged Flanges
● Spektakel Forged Flanges
● Loose Forged Flange
● Plate Flange
● Flaach Flange
● Oval Forged Flange
● Wandkraaft Flange
● ForgedTube Blat
● CUSTOM Forged Flange