Flanges Tempa Utas
Produsen Flange Utas Ing China
Produsen Flanges Tempa Utas ing Shanxi lan Shanghai, China
Flange Utas minangka jinis flange sing dipasang ing pipa. Dirancang nganggo flange sing longgar. Ing kauntungan iku ora welding dibutuhake lan torsi tambahan kui ing silinder utawa pipe nalika flange wis deformed cilik. Kerugian yaiku flange sing kandel lan regane dhuwur. Cocog kanggo sambungan menyang pipa tekanan dhuwur.
Flanges Utas digawe dening mesin bolongan utama saka flange menyang thread pipe lan nyambungake karo pipa Utas. Iku flange non-welded. Dibandhingake karo flange welding flat utawa flange welding butt, flange Utas nduweni karakteristik instalasi lan pangopènan sing trep, lan bisa digunakake ing sawetara pipa ing ngendi welding ora diidini ing situs kasebut. Flange baja paduan duwe kekuatan sing cukup, nanging ora gampang dilas, utawa kinerja welding ora apik, lan flange benang uga bisa dipilih. Nanging, disaranake ora nggunakake flange Utas kanggo ngindhari bocor nalika suhu pipa owah banget utawa suhu luwih dhuwur tinimbang 260 °C lan luwih murah tinimbang -45 °C.
Ukuran
Ukuran Flange Ulir: 1/2"-160"
DN10~DN4000
Ngadhepi
Pasuryan Datar Pasuryan Penuh (FF), Pasuryan Ngangkat (RF), Pasuryan Lanang (M), Pasuryan Wadon (FM), Pasuryan Ilat (T), Pasuryan Alur (G), Pasuryan Sendi Dering ( RTJ/ RJ ).
Perawatan lumahing / Coating
Cat Anti-karat, Cat Minyak Ireng, Transparan Kuning, Dilapisi Seng, Galvanis Cold lan Hot Dip, Rampung Varnish Emas.
Flanges Standar Internasional DHDZ nyedhiyakake:
American Standard
ANSI B16.5
Kelas tekanan: 150 ~ 1200
Ukuran: 1/2" - 24"
ASME B16.5
Tekanan Kelas 150~1200
Ukuran: 1/2" - 24"
ASME B16.47A
Kelas tekanan 150~900
Ukuran: 1/2" - 24"
ASME B16.47B
Tekanan Kelas 75~900
Ukuran: 26"-60"
ANSI B16.1
Orifice Union B16.36
MSS-SP-44
API
AWWA
Jinis
Welding neck, Slip on, Threaded, Lap joint,
Las soket, Buta, Lubang, Buta Tontonan
Standar Jerman
DIN
Tekanan PN6 ~ PN400
Ukuran DN10~DN4000
Jinis
DIN 2527-Wuta; PN~PN100
DIN 2566-Screwed: PN10 lan PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 lan PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40
Standar Afrika
Standar
SABS 1123
Tekanan 250 kpa ~ 6400 kpa
Ukuran: DN10 ~ DN3600
Jinis
Buta, Piring, Welding neck, Longgar,
Integral, Slip ing
Standar Australia
Standar
AS 2129
Tabel: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Ukuran: DN15 ~ DN3000
AS 4087
Tekanan PN16~PN35
Ukuran: DN50 ~ DN1200
Jinis
Buta, Piring, Welding gulu, Boss
Standar Kanada
Standar
CSA Z245.12
Tekanan PN20 ~ PN400
Ukuran: NPS 1/2"-60"
Standar Jepang
Standar
JIS B2220
Tekanan 5K ~ 30K
Ukuran: DN10 ~ DN1500
Jinis
Slip on plate, Slip on hubbed, Socket welding, Welding neck, Lap joint, Threaded, Blind, Integral
Standar Eropa
Standar
EN 1092-1
Tekanan PN6 ~ PN100
Ukuran: DN10 ~ DN4000
Jinis
Plate, Loose plate, Buta, Welding neck,Hubbed slip on, Hubbed threaded
Standar Inggris
Standar
BS 4504
Tekanan PN2.5~PN40
Ukuran: DN10 ~ DN4000
BS 10
Tabel: T/A, T/D, T/E, T/F, T/H
Tekanan PN2.5~PN40
Ukuran: 1/2-48"
Jinis
Piring, Longgar, Welding neck, Buta,
Hubbed slip on, Hubbed threaded
Integral, Plain
Standar Prancis
Standar
NFE 29203
Tekanan PN2.5~PN420
Ukuran: DN10 ~ DN600
Jinis
Buta, Piring, Welding neck, Longgar,
Integral, Slip ing
Standar Italia
Standar
UNI 2276-2278
Tekanan PN6~PN40
Ukuran: DN10 ~ DN600
Jinis
Buta, Piring, Welding neck, Longgar,
Integral, Slip ing
Standar Rusia
Standar
GOST 1281
Tekanan PN15~PN2000
Ukuran: DN10 ~ DN2400
Jinis
Buta, Piring, Welding neck, Longgar,
Integral, Slip ing
Standar Cina
Standar
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Tekanan 0,25 MPa ~ 10 Mpa
Ukuran: DN10 ~ DN1200
Jinis
Buta, Plate, Welding neck, Lap joint, Slip on,
Utas, gulu las dawa
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Bahan sing digunakake dening DHDZ:
BAJA KARBON - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM/ASME A182 Gr F304 , A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F304L, A3 2 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L
Duplex - F-51
BAJA PADUAN: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22
Produsen, eksportir & pemasok ASME/ANSI B16.5 baja karbon Weld Neck Flange, baja tahan karat Weld Neck Flange, baja paduan Weld Neck Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46,F48, F50, F52, F56, F60, F70, A516.60,65,70. Produsen Flange WNRF ing Shanxi.
A182 Gr F304 Ulir Tempa Flensa, A182 Gr F 304L Ulir Tempa Flanges, A182 Gr F316 Ulir Ulir Tempa Flanges, A182 Gr F316L Ulir Ulir Tempa Produsen, A182 Gr F316Ti Flanges, A182 Gr F316Ti Flanges, A182 Gr F316Ti Flanges 182 Gr F321H Utas Forged Flange , A182 gr F347 flanges sing disarang, ASTM A182 F5 benang pemasok flanges, ASTM A182 F9 flanges, Daging flanges flanges, Astm a182 F22 FLOGED Flanges, ASTM A182 F91 Threaded Forged Flanges, ASTM A350 LF2 Threaded Forged Flanges, ASTM A350 LF3 Threaded Forged Flanges, ASTM A350 LF6 Threaded Forged Flanges Produsen ing Shanxi lan Shanghai.
Kita DHDZ nggawe flange palsu sing cocog karo standar kualitas internasional:DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, dll. Kami DHDZ memproduksi 75 lbs, 150lbs, 300lbs, 600lbs, 900lbs, 1500lbs PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 lan GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN4.0MPA, PN4.0MPA utawa SANS30k123 , 1600kpa, 2500kpa, 4000kpa ratings flange miturut specification panuku kang.Produsen Flange Weld Neck ing China -Telpon: 86-21-52859349Kirimi Mail:dhdz@shdhforging.com
Jenis Flange:WN, Utas, LJ, SW, SO, Buta, LWN,
● Weld Neck Forged Flange
● Utas Forged Flange
● Lap Joint Forged Flange
● Socket Weld Forged Flange
● Slip On Forged Flange
● Blind Forged Flange
● Long Weld Neck Forged Flange
● Orifice Forged Flange
● Spectacle Forged Flange
● Loose Forged Flange
● Plate Flange
● Flat Flange
● Oval Forged Flange
● Angin Power Flange
● ForgedTube Sheet
● CUSTOM Forged Flange
