ShaftSolid Bar
Detay pwodwi:
Kote ki gen orijin: Shanxi
Non mak: DHDZ
Sètifikasyon: ASME, JIS, DIN, GB, BS, EN, AS, SABS, ASTM A370, API 6B, API 6C
Rapò tès: MTC, HT, UT, MPT, rapò dimansyon, tès vizyèl, EN10204-3.1, EN10204-3.2
Jounal sifas rugueux: 2.5-0.63μm
Kantite minimòm lòd: 1 moso
Pake transpò: Ka Plywood
Pri: negosyab
Kapasite pwodiksyon: 100PCS / Month
| Eleman materyèl | C | Mn | P | S | SI | Cr | NI | Mo | Cu | N |
| 4130 | 0.33 | 0.7 | <0.025 | <0.025 | <0.35 | 0.8-1.0 | <0.5 | 0.15-0.25 | / | / |
| 4140 | 0.43 | 1.0 | <0.030 | <0.040 | <0.35 | 0.8-1.1 | <0.030 | 0.15-0.25 | <0.030 | / |
| A105 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| LF2 | 0.19-0.23 | 0.9-1.05 | ≤ 0.035 | ≤ 0.030 | 0.15-0.3 | ≤ 0.1 | ≤ 0.4 | ≤ 0.12 | ≤ 0.4 | / |
| 35NiCrMoV12-5 | 0.30-0.40 | 0.4-0.7 | ≤ 0.015 | ≤ 0.015 | ≤ 0.35 | 1.0-1.4 | 2.5-3.5 | 0.35-0.65 | / | / |
| ASTMA36 | ≤ 0.26 | 0.6-0.9 | ≤ 0.040 | ≤ 0.050 | ≤ 0.40 | / | / | / | ≥0.20 | / |
| Pwopriyete mekanik | Dyamèt (mm) | TS/Rm (Mpa) | YS/Rp0.2 (Mpa) | EL/A5 (%) | RA/Z (%) | Notch | Enèji enpak | HBW |
| 4130 | Ф10 | ＞655 | ＞517 | ＞18 | >35 | V | ≥20J (-60℃) | 197-23 |
| 4140 | Ф10 | > 1080 | ＞930 | >25 | >45 | V | ≥25J (-60 ℃) | <217 |
| A105 | / | ≥485 | ≥250 | ≥22 | ≥30 | V | / | 143-187 |
| LF2 | / | 485-655 | ≥250 | ≥22 | ≥30 | V | ≥27J(-29℃) | 143-187 |
| 35NiCrMoV12-5 | Ф12.5 | ≥1100 | ≥850 | ≥8.0 | / | V | / | / |
| ASTMA36 | / | 400-550 | ≥250 | ≥23 | / | V | / | / |
Pwosedi pwodiksyon:
Forge pwosesis koule kontwòl kalite: materyèl bwit asye ingot nan depo (tès kontni an chimik) → Koupe → Chofaj (tès tanperati founo) → Tretman chalè apre Forge (tès tanperati founo) Dechaje fou a (enspeksyon vid) → Machining → Enspeksyon (UT) ,MT, Visal diamention, dite) → QT → Enspeksyon (UT, pwopriyete mekanik, dite, gwosè grenn) → Fini D → Enspeksyon (dimansyon) → Anbalaj ak Marking (sye koupon pou achte, make) → Depo chajman
Avantaj:
Ekselan pwopriyete mekanik,
Segondè presizyon tolerans dimansyon,
Kontwole pwosedi pwodiksyon an entèdi,
Ekipman fabrikasyon avanse ak aparèy enspeksyon,
Ekselan pèsonalite teknik,
Pwodui diferan dimansyon ki baze sou kondisyon kliyan an,
Fè atansyon sou pwoteksyon pake a,
Kalite sèvis konplè.
Endistri aplikasyon:
Machin agrikòl, endistri pharmaceutique, manifakti zouti machin, endistri konstriksyon, elatriye.
