OEM/ODM Manufacturer Astm A859 Karɓi Bar - Ƙarfafa Silinda - DHDZ
OEM/ODM Manufacturer Astm A859 Karɓi Bar - Ƙarfafa Silinda - DHDZ Cikakken Bayani:
Bude Die Forgings Manufacturer A China
RUBUTUN CYLInder
| Max. OD | Max. Tsawon | Max. Nauyi |
| 4000mm | 10000mm | Ton 30 |
DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.
Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da marasa lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.
Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4
Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.
Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)
Abubuwan Jiki
| Kayayyaki | Ma'auni | Mai mulki |
| Yawan yawa | 7.85 g/cm 3 | 0.284 lb/in³ |
| Wurin narkewa | 1432°C | 2610°F |
AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu
| AISI 4130 | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | Mo |
| 0.280 - 0.330 | 0.40 - 0.60 | 0.15 - 0.30 | 0.030 max | 0.040 max | 0.80-1.10 | 0.15-0.25 | 0.25 max | 0.35 max | 0.15-0.25 |
| Saukewa: ASTM A29/A29M | Farashin 17350 | Saukewa: G4404 | GB/T 1229 | ISO 683/18 |
| AISI 4130/ G41300 | 1.7218/25CrMo4 | Farashin SMN420 | 25CrMo4 | 25CrMo4 |
Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.
AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.
Girman: φ774.8 0xφ317.0XH825.5mm
Kerawa da Maganin Zafi
Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.
Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.
Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi
| Ƙirƙira | 1093-1205 ℃ |
| Annealing | 778-843 ℃ tanderun sanyi |
| Haushi | 399-649 ℃ |
| Daidaitawa | 871-898 ℃ iska sanyi |
| Austenize | 815-843 ℃ ruwa quench |
| Rage damuwa | 552-663 ℃ |
| Quenching | 552-663 ℃ |
| Rm - Ƙarfin ɗaure (MPa) (Q +T) | ≥930 |
| Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T) | ≥785 |
| KV - Tasirin makamashi (J) (Q +T) | +20° |
| A - Min. elongation a karaya (%) (Q +T) | ≥12 |
| Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T) | ≥50 |
| Taurin Brinell (HBW): (Q +T) | ≤229HB |
KARIN BAYANI
NEMAN MAGANA A YAU
KO KIRA: 86-21-52859349
4130
Sabon-4130-Alloy-karfe
Hotuna dalla-dalla samfurin:
Jagoran Samfuri masu alaƙa:
"Sarrafa ma'auni ta cikakkun bayanai, nuna iko ta inganci". Kasuwancinmu ya yi ƙoƙari ya kafa ma'aikatan ƙungiyar masu inganci da kwanciyar hankali kuma sun bincika ingantaccen tsari mai kyau na tsarin aiki don OEM / ODM Manufacturer Astm A859 Forged Bar - Forged Cylinders - DHDZ , Samfurin zai samar wa duk faɗin duniya, kamar su. : Uruguay, Maldives, Iceland, Kamfaninmu ya riga ya wuce daidaitattun ISO kuma muna da cikakkiyar mutunta haƙƙin mallaka da haƙƙin mallaka na abokin ciniki. Idan abokin ciniki ya ba da nasu ƙira, Za mu ba da tabbacin cewa za su kasance kawai wanda zai iya samun waɗannan samfuran. Muna fatan cewa tare da kyawawan samfuranmu na iya kawo wa abokan cinikinmu babban arziki.
By Diana daga Islamabad - 2017.03.07 13:42 Abokan ciniki da ma'aikatan sabis na abokin ciniki suna da haƙuri sosai kuma duk suna da kyau a Turanci, zuwan samfurin kuma ya dace sosai, mai kaya mai kyau.
By Odelia daga Belgium - 2018.06.18 17:25 Rukunin samfuran
-
Low MOQ don Dogon Welding Neck Flange - Orifice ...
-
Factory kai tsaye yana ba da 1 Carbon Karfe Flange - ...
-
Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru na Kasar Sin
-
Zafafan Sabbin Kayayyaki Malleable Malleable Thread Floor Flange ...
-
Manufactur misali Blanks Flange - Spectacle ...
-
Factory wholesale Bakin Karfe Orifice Flang...
