100% Asalin Factory Forging Shaft Durgapur - Forged Silinda - DHDZ

Takaitaccen Bayani:


Cikakken Bayani

Tags samfurin

Bidiyo mai alaka

Jawabin (2)

Har ila yau, mun ƙware a cikin haɓaka abubuwan gudanarwa da tsarin QC don tabbatar da cewa za mu iya kiyaye babban riba a cikin kamfani mai fa'ida don fafatawa.Hoto na Carbon Karfe 8 Flange Makafi, Zamewa Akan Ƙarƙashin Fuskar Fuskar, Karfe Karfe Flange, Da gaske muna fata muna girma tare da abubuwan da muke da su a duk faɗin muhalli.
100% Asalin Factory Forging Shaft Durgapur - Ƙarfafa Silinda - DHDZ Cikakken Bayani:

Bude Die Forgings Manufacturer A China

RUBUTUN CYLInder

ƙirƙira-Silinda

Max. OD Max. Tsawon Max. Nauyi
4000mm 10000mm Ton 30

DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.

Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da marasa lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.

Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.

Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)

Abubuwan Jiki

Kayayyaki Ma'auni Mai mulki
Yawan yawa 7.85 g/cm 3 0.284 lb/in³
Wurin narkewa 1432°C 2610°F

AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu

AISI 4130

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

Mo

0.280 - 0.330

0.40 - 0.60

0.15 - 0.30

0.030 max

0.040 max

0.80-1.10

0.15-0.25

0.25

max

0.35

max

0.15-0.25


Saukewa: ASTM A29/A29M

Farashin 17350

Saukewa: G4404

GB/T 1229

ISO 683/18

AISI 4130/ G41300

1.7218/25CrMo4

Farashin SMN420

25CrMo4

25CrMo4

Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.

AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.

Girman: φ774.8 0xφ317.0XH825.5mm

Kerawa da Maganin Zafi

Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.

Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.

Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi

Ƙirƙira

1093-1205 ℃

Annealing

778-843 ℃ tanderun sanyi

Haushi

399-649 ℃

Daidaitawa

871-898 ℃ iska sanyi

Austenize

815-843 ℃ ruwa quench

Rage damuwa

552-663 ℃

Quenching

552-663 ℃


Rm - Ƙarfin ɗaure (MPa) (Q +T)

≥930

Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T)

≥785

KV - Tasirin makamashi (J)

(Q +T)

+20°
≥63

A - Min. elongation a karaya (%) (Q +T)

≥12

Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T)

≥50

Taurin Brinell (HBW): (Q +T)

≤229HB

KARIN BAYANI
NEMAN MAGANA A YAU

KO KIRA: 86-21-52859349

pdf4130

pdfSabon-4130-Alloy-karfe

 


Hotuna dalla-dalla samfurin:

100% Asalin Factory Forging Shaft Durgapur - Forged Silinda - DHDZ cikakkun hotuna


Jagoran Samfuri masu dangantaka:

Muna tallafawa masu siyan mu tare da ingantattun kayayyaki masu inganci da babban kamfani mai mahimmanci. Kasancewar ƙwararrun masana'anta a cikin wannan sashin, yanzu mun sami ɗorewa mai amfani gamuwa a samarwa da sarrafa 100% Original Factory Forging Shaft Durgapur - Forged Cylinders – DHDZ , Samfurin zai samar wa duk faɗin duniya, kamar: Roman, Amurka, San Francisco, A halin yanzu, muna gina sama da cinye alwatika kasuwar & dabarun hadin gwiwa domin cimma Multi-nasara ciniki wadata sarkar fadada mu kasuwar a tsaye da kuma a kwance don wani haske al'amurra. ci gaba. Falsafar mu ita ce ƙirƙirar samfura masu tsada, haɓaka cikakkun ayyuka, haɗin gwiwa don dogon lokaci da fa'idodin juna, tabbatar da ingantaccen tsarin tsarin masu kaya da wakilai na tallace-tallace, tsarin siyar da dabarun haɗin gwiwa.
  • Ma'aikatar tana da kayan aiki na ci gaba, ƙwararrun ma'aikata da matakin gudanarwa mai kyau, don haka ingancin samfurin yana da tabbacin, wannan haɗin gwiwar yana da annashuwa da farin ciki! Taurari 5 Daga Eric daga Malta - 2017.09.29 11:19
    Wannan kamfani ya dace da buƙatun kasuwa kuma yana shiga cikin gasar kasuwa ta hanyar samfuransa masu inganci, wannan kamfani ne da ke da ruhun Sinawa. Taurari 5 By Carey daga Honduras - 2018.02.04 14:13
    Ku rubuta sakonku anan ku aiko mana