Losse smeid flenzen fabrikant yn Shanxi en Shanghai, Sina

De losse flange wurdt sleeved op 'e piipein mei help fan kraach, in stielen ring, ensfh., En de losse flange kin wurde ferpleatst op' e piipein. Stalen ringen as kragen binne de sealing gesichten, en de losse flanges fungearje om compress se. It kin sjoen wurde dat de losse flange net yn kontakt is mei it medium trochdat se blokkearre wurde troch de stielen ring of de kraach. Om't de flange beweechber is en net direkt ferbûn is mei de piip, wurdt it in losse flange neamd. Der is in oare term neamd in lapped flange.

Grutte

Losse flenzen Grutte: 1/2"-160"

DN10~DN4000

Facing

Flat Face Full Face (FF), Raised Face (RF), Male Face (M), Female Face (FM), Tongue Face (T), Groove Face (G), Ring Joint Face (RTJ/RJ)

Oerflak / Coating Behanneling

Anti-roestferve, oalje swarte ferve, giel transparant, sink plated, kâld en hyt dip galvanisearre, gouden fernisfinish

International Standard Flanges DHDZ biedt:

Amerikaanske Standert
ANSI B16.5
Drukklasse: 150~1200
Grutte: 1/2"-24"

ASME B16.5
Drukklasse 150~1200
Grutte: 1/2"-24"

ASME B16.47A
Drukklasse 150~900
Grutte: 1/2"-24"

ASME B16.47B
Drukklasse 75~900
Grutte: 26"-60"

ANSI B16.1
Orifice Union B16.36
MSS-SP-44
API
AWWA
Type
Lashals, Slip op, Threaded, Lap joint,
Socket weld, Blind, Orifice, Brilleblind

Dútske Standert
DIN
Druk PN6~PN400
Grutte DN10~DN4000
Type
DIN 2527-Blind; PN~PN100
DIN 2566-Screwed: PN10 en PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 en PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Afrikaanske Standert
Standert
SABS 1123
Druk 250kpa~6400kpa
Grutte: DN10~ DN3600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Australyske Standert
Standert
AS 2129
Tabel: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Grutte: DN15~ DN3000

AS 4087
Druk PN16~PN35
Grutte: DN50~ DN1200
Type
Blind, Plaat, Welding neck, Boss ??

Kanadeeske Standert
Standert
CSA Z245.12
Druk PN20~PN400
Grutte: NPS 1/2"-60"

Japanske standert
Standert
JIS B2220
Druk 5K ~ 30K
Grutte: DN10~ DN1500
Type
Slip op plaat, Slip op hub, Socket welding, Welding hals, Lap joint, Threaded, Blind, Yntegraal

Europeeske Standert
Standert
EN 1092-1
Druk PN6~PN100
Grutte: DN10~ DN4000
Type
Plaat, Losse plaat, Blind, Welding hals, Hubbed slip op, Hubbed threaded

Britske Standert
Standert
BS 4504
Druk PN2.5~PN40
Grutte: DN10~ DN4000

BS 10
Tabel: T/A, T/D, T/E, T/F, T/H
Druk PN2.5~PN40
Grutte: 1/2 ~ 48"
Type
Plaat, Los, Lashals, Blind,
Hubbed slip op, Hubbed threaded
Yntegraal, Plain

Frânsk Standert
Standert
NFE 29203
Druk PN2.5~PN420
Grutte: DN10~ DN600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Itaalje Standert
Standert
UNI 2276-2278
Druk PN6~PN40
Grutte: DN10~ DN600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Ruslân Standert
Standert
GOST 1281
Druk PN15~PN2000
Grutte: DN10~ DN2400
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Sineeske Standert
Standert
GB9112-2000
GB9113-2000~GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1012-81
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Druk 0.25MPa~10Mpa
Grutte: DN10~ DN1200
Type
Blind, Plaat, Lashals, Lap joint, Slip on,
Threaded, Lange welding hals
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Materialen brûkt troch DHDZ:

1. KOOLSTAL - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36

2. RVS - ASTM/ASME A182 Gr F304 , A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A182 Gr F316L, A162 Gr F1 A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L

3. Duplex - F-51

4. LEGERINGSSTAAL: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Fabrikant, eksporteur en leveransier fan ASME/ANSI B16.5 koalstofstaal Losse flanges, roestfrij stiel Losse flange, legere stiel Losse flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46, F45, F50, , F56, F60, F70, A516.60,65,70. Losse flanges Fabrikant yn Shanxi

A182 Gr F304 Losse smeid flange, A182 Gr F 304L Losse smeid flange , A182 Gr F316 Losse smeid flange, A182 Gr F316L Losse smeid flange Fabrikant, A182 Gr F316Ti Losse smeid flange , A182 Loose smeid Flange F122 Losse smeid flange, A182 Gr F347 Losse smeid flange, ASTM A182 F5 Losse smeid flange leveransier, ASTM A182 F9 Losse smeid flange, Losse smeid flange eksporteur yn Shanxi, ASTM A182 F11 losse smeid flange leveransiers, ASTM A182 Flange F12, ASTM A182 Flange F22 Los Forged Flens, ASTM A182 F91 losse smeid flange, ASTM A350 LF2 losse smeid flange, ASTM A350 LF3 losse smeid flange, ASTM A350 LF6 losse smeid flange fabrikant yn Shanxi en Shanghai

Wy DHDZ produsearje smeid flanges dy't foldogge oan ynternasjonale kwaliteitsstandert:

DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, ensfh. PN6, PN10, PN25; PN40 1600kpa, 2500kpa, 4000kpa flenswurdearrings neffens spesifikaasje fan keaper.

Losse flange fabrikant yn Sina -Skilje: 86-21-52859349

Stjoer e-post:dhdz@shdhforging.com

Soarten flenzen:WN, Threaded, LJ, SW, SO, Blind, LWN,

● Weld Neck Forged Flanges

● Threaded Forged Flanges

● Lap Joint Forged Flange

● Socket Weld Forged Flange

● Slip On Forged Flange

● Blind Forged Flange

● Lange Weld Neck Forged Flange

● Orifice Forged Flanges

● Spectacle Forged Flanges

● Lose Forged Flange

● Plate Flange

● Flat Flange

● Oval Forged Flange

● Wind Power Flange

● ForgedTube Sheet

● CUSTOM Forged Flange