Orifice Flange Manufacturer Sa China

Orifice Forged Flanges Manufacturer sa Shanxi at Shanghai, China
Ang Orifice Flanges ay ginagamit sa mga orifice meter para sa layunin ng pagsukat ng daloy ng rate ng alinman sa mga likido o gas sa kani-kanilang pipeline. Ang mga pares ng presyur na "Tappings", karamihan ay nasa 2 panig, na direktang tapat sa isa't isa, ay pinapasok sa orifice flange.

Sukat
Laki ng Orifice Flange: 1/2"-160"
DN10~DN4000

Nakaharap
Flat Face Full Face (FF), Nakataas na Mukha (RF), Male Face(M), Female Face (FM), Tongue Face(T), Groove Face (G), Ring Joint Face ( RTJ/ RJ ).

Paggamot sa Ibabaw/Patong
Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized, Golden Varnish Finish.

Nagbibigay ang International Standard Flange DHDZ ng:

American Standard
ANSI B16.5
Klase ng Presyon: 150~1200
Sukat: 1/2"-24"

ASME B16.5
Klase ng Presyon 150~1200
Sukat: 1/2"-24"

ASME B16.47A
Klase ng Presyon 150~900
Sukat: 1/2"-24"

ASME B16.47B
Klase ng Presyon 75~900
Sukat: 26"-60"

ANSI B16.1
Unyon ng Orifice B16.36
MSS-SP-44
API
AWWA
Uri
Welding neck, Slip on, Threaded, Lap joint ,
Socket weld , Blind , Orifice, Spectacle blind

Pamantayan ng Aleman
DIN
Presyon PN6~PN400
Sukat DN10~DN4000
Uri
DIN 2527-Bulag; PN~PN100
DIN 2566-Screwed:PN10 at PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 at PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

African Standard
Pamantayan
SABS 1123
Presyon 250kpa~6400kpa
Sukat: DN10~ DN3600
Uri
Bulag, Plato, Welding neck, Maluwag,
Integral, Slip on

Pamantayan ng Australia
Pamantayan
AS 2129
Talahanayan: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Sukat: DN15~ DN3000

AS 4087
Presyon PN16~PN35
Sukat: DN50~ DN1200
Uri
Bulag, Plato, Welding neck, Boss

Pamantayan ng Canada
Pamantayan
CSA Z245.12
Presyon PN20~PN400
Laki: NPS 1/2”-60”

Pamantayan ng Hapon
Pamantayan
JIS B2220
Presyon 5K ~30K
Sukat: DN10~ DN1500
Uri
Slip on plate, Slip on hubbed, Socket welding, Welding neck, Lap joint, Threaded, Blind,Integral

European Standard
Pamantayan
EN 1092-1
Presyon PN6~PN100
Sukat: DN10~ DN4000
Uri
Plate, Maluwag na plato, Blind, Welding neck, Hubbed slip on, Hubbed threaded

British Standard
Pamantayan
BS 4504
Presyon PN2.5~PN40
Sukat: DN10~ DN4000
BS 10
Talahanayan: T/A, T/D, T/E, T/F, T/H
Presyon PN2.5~PN40
Sukat: 1/2~ 48”
Uri
Plate, Maluwag , Welding neck, Bulag,
Hubbed slip on , Hubbed threaded
Integral , Plain

French Standard
Pamantayan
NFE 29203
Presyon PN2.5~PN420
Sukat: DN10~ DN600
Uri
Bulag, Plato, Welding neck, Maluwag,
Integral, Slip on

Pamantayan ng Italya
Pamantayan
UNI 2276-2278
Presyon PN6~PN40
Sukat: DN10~ DN600
Uri
Bulag, Plato, Welding neck, Maluwag,
Integral, Slip on

Pamantayan ng Russia
Pamantayan
GOST 1281
Presyon PN15~PN2000
Sukat: DN10~ DN2400
Uri
Bulag, Plato, Welding neck, Maluwag,
Integral, Slip on

Pamantayan ng Tsino
Pamantayan
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Presyon 0.25MPa~10Mpa
Sukat: DN10~ DN1200
Uri
Bulag, Plate, Welding neck, Lap joint, Slip on,
Sinulid, Mahabang hinang leeg
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Mga materyales na ginamit ng DHDZ:
CARBON STEEL - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM/ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F304L, A182 Gr F304L, A3 2 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L
Duplex - F-51
HALONG BAKAL: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Manufacturer, exporter at supplier ng ASME/ANSI B16.5 carbon steelWeld NeckMga flange, hindi kinakalawang na asero Weld Neck Flange, haluang metal na bakal Weld Neck Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46,F48,F50, F52, F56, F60, F70, A516,60, 70. WNRF Flanges Manufacturer sa Shanxi.

A182 Gr F304 Orifice Forged Flanges, A182 Gr F 304L Orifice Forged Flanges, A182 Gr F316 Orifice Forged Flanges, A182 Gr F316L Orifice Forged Flanges Manufacturer, A182 Gr F316Ti Flanges, A182 Gr F316Ti Flanges, A182 Gr F316Ti Flanges 182 Gr F321H Orifice Forged Flange . Flanges, ASTM A182 F91 Orifice Forged Flanges, ASTM A350 LF2 Orifice Forged Flanges, ASTM A350 LF3 Orifice Forged Flanges, ASTM A350 LF6 Orifice Forged Flanges Manufacturer sa Shanxi at Shanghai.

Gumagawa kami ng DHDZ ng mga pekeng flanges na nakakatugon sa pamantayang pang-internasyonal na kalidad: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, atbp. Gumagawa kami ng DHDZ ng 75 lbs, 150lbs, 300lbs, 600lbs, 900lbs, 15250lbs, 15250lbs PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 at GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN4.0MPA, SANS1120, SANS1120, SANS1103 , 1600kpa, 2500kpa, 4000kpa flange rating ayon sa detalye ng mamimili. Weld Neck Flange Manufacturer sa China – Tumawag sa :86-21-52859349 Magpadala ng Mail:dhdz@shdhforging.com

Mga Uri ng Flange: WN, Threaded, LJ, SW, SO, Blind, LWN,
● Weld Neck Forged Flange
● Sinulid na Forged Flange
● Lap Joint Forged Flange
● Socket Weld Forged Flange
● Slip Sa Forged Flange
● Blind Forged Flange
● Long Weld Neck Forged Flange
● Orifice Forged Flange
● Spectacle Forged Flange
● Loose Forged Flange
● Plate Flange
● Flat Flange
● Oval Forged Flange
● Wind Power Flange
● ForgedTube Sheet
● CUSTOM Forged Flange