Stainless steel elbow installation precautions

Stainless steel elbow is mainly different material, its chemical composition will keep the surface of the elbow for a long time will not rust, will not be corroded. Stainless steel elbows In piping systems, elbows are pipe fittings that change the direction of the pipeline. Next by Zhitong stainless steel elbow installation precautions.

Precautions for the installation of stainless steel elbow are as follows:

1. Before installation, it is necessary to carefully check the various standards of stainless steel elbow, whether the diameter meets the requirements of use, remove the defects caused by the transportation process, and remove the dirt of stainless steel elbow, do a good job before installation, ready.

2. During installation, the stainless steel elbow can be directly installed on the pipeline according to the connection mode, and installed according to the position used. Generally, it can be installed in any position of the pipeline.

3 stainless steel elbow ball valve, globe valve, gate valve when used, only for fully open or fully closed, not allowed to do flow regulation, so as to avoid the sealing surface erosion, accelerated wear.

4. The bolts of the valve packing gland should be tightened evenly, and should not be pressed into a crooked state, so as to avoid injury to hinder the movement of the valve stem or cause leakage.

https://www.shdhforging.com/forged-blocks.html
The basic difference between stainless steel elbow and elbow is that stainless steel elbow is relatively short. R=1 to 2 times is a bend, and any larger multiple is called a bend.

In the installation of stainless steel elbow, we need to pay more attention to the above precautions, the correct installation of stainless steel elbow.


Post time: Feb-09-2023