Orifice Flange Produsén Di Cina

Orifice Forged Flanges Produsén di Shanxi sareng Shanghai, Cina
Orifice Flanges dianggo sareng méter orifice pikeun ngukur laju aliran cairan atanapi gas dina pipa masing-masing. Pasangan tekanan "Tappings", lolobana dina 2 sisi, langsung sabalikna silih, anu machined kana flange orifice.

Ukuran
Ukuran Flange Orifice: 1/2"-160"
DN10~DN4000

Nyanghareupan
raray datar raray pinuh (FF), raray diangkat (RF), raray jalu (M), raray bikang (FM), raray létah (T), raray alur (G), ring Joint raray (RTJ / RJ).

Perlakuan permukaan / palapis
Cat anti karat, Cat Minyak Hideung, Konéng Transparan, Séng Plated, Tiis sareng Hot Dip Galvanized, Golden Varnish Finish.

Standar Internasional Flanges DHDZ nyadiakeun:

Standar Amérika
ANSI B16.5
Kelas tekanan: 150 ~ 1200
Ukuran: 1/2"-24"

ASME B16.5
Tekanan Kelas 150~1200
Ukuran: 1/2"-24"

ASME B16.47A
Kelas tekanan 150~900
Ukuran: 1/2"-24"

ASME B16.47B
Tekanan Kelas 75~900
Ukuran: 26"-60"

ANSI B16.1
Uni Orifice B16.36
MSS-SP-44
API
AWWA
Tipe
Welding neck, Slip on, Threaded, Lap joint,
Socket weld, Buta, Orifice, Buta Tontonan

Standar Jerman
DIN
Tekanan PN6~PN400
Ukuran DN10~DN4000
Tipe
DIN 2527-Buta; PN~PN100
DIN 2566-Screwed: PN10 jeung PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 jeung PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Standar Afrika
Standar
SABS 1123
Tekanan 250kpa ~ 6400kpa
Ukuran: DN10 ~ DN3600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Slip on

Standar Australia
Standar
AS 2129
Méja: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Ukuran: DN15 ~ DN3000

AS 4087
Tekanan PN16~PN35
Ukuran: DN50 ~ DN1200
Tipe
Buta, Piring, Las beuheung, Bos

Standar Kanada
Standar
CSA Z245.12
Tekanan PN20 ~ PN400
Ukuran: NPS 1/2"-60"

Standar Jepang
Standar
JIS B2220
Tekanan 5K ~ 30K
Ukuran: DN10 ~ DN1500
Tipe
Slip on plate, Slip on hubbed, Socket welding, Las beuheung, Lap joint, Threaded, Buta, Integral

Standar Éropa
Standar
EN 1092-1
Tekanan PN6 ~ PN100
Ukuran: DN10 ~ DN4000
Tipe
Piring, piring leupas, Buta, beuheung las, Hubbed slip on, Hubbed threaded

Standar Britania
Standar
BS 4504
Tekanan PN2.5 ~ PN40
Ukuran: DN10 ~ DN4000
BS 10
Méja: T/A, T/D, T/E, T/F, T/H
Tekanan PN2.5 ~ PN40
Ukuran: 1/2-48"
Tipe
Piring, Longgar, Welding beuheung, Buta,
Hubbed slip on, Hubbed threaded
Integral, polos

Standar Perancis
Standar
NFE 29203
Tekanan PN2.5 ~ PN420
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Slip on

Italia Standar
Standar
UNI 2276-2278
Tekanan PN6~PN40
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Slip on

Rusia Standar
Standar
GOST 1281
Tekanan PN15~PN2000
Ukuran: DN10 ~ DN2400
Tipe
Buta, piring, beuheung las, longgar,
Integral, Slip on

Standar Cina
Standar
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB / T11694-94, GB / T3766-1996, GB / T11693-94, GB10746-89, GB / T4450-1995, GB / T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406
Tekanan 0.25MPa ~ 10Mpa
Ukuran: DN10 ~ DN1200
Tipe
Buta, Piring, Welding beuheung, Lap joint, Slip on,
Threaded, beuheung las panjang
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406

Bahan dipaké ku DHDZ:
BAJA KARBON - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM / ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F304L, A182 Gr F304L, A3 F316LN, A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310L, 909 310, 9
Duplex - F-51
BAJA PADUHAN: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Pabrikan, eksportir & supplier ASME / ANSI B16.5 baja karbon Weld Neck Flange, stainless steel Weld Neck Flange, alloy steel Weld Neck Flange, ASTM A105 / A105N, A350 LF1, LF2 CL1 / CL2, A694 F42, F46, F48, F50, F52, F56, F60, F70, A516.60,65,70. WNRF Flanges Produsén di Shanxi.

A182 Gr F304 Orifice Flange, A182 Gr F 304L Weld beuheung Flange, A182 gr F316 Weld beuheung Flange, A182 Gr F316L Weld beuheung Flange Produsén, A182 Gr F316Ti Weld beuheung, A282 Gr Neck F3 F321H Weld Neck Flange, A182 Gr F347 Weld Neck Flange, ASTM A182 F5 Weld Neck Flange supplier, ASTM A182 F9 Weld Neck Flange, WNRF Flanges Exporter Di Shanxi, ASTM A182 F11 Weld Neck Flange suppliers, ASTM A182 Weld Neck Flange, ASTM A182 Weld Neck Flange F22 Las beuheung Flange, ASTM A182 F91 Las beuheung Flange, ASTM A350 LF2 Las beuheung Flange, ASTM A350 LF3 Las beuheung Flange, ASTM A350 LF6 Las beuheung Flange Produsén di Shanxi jeung Shanghai.

Kami DHDZ ngadamel flanges palsu anu nyumponan standar kualitas internasional: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, jsb Urang DHDZ pabrik 75 lbs, 150lbs, 300lbs, 600lbs, 900lbs, 1500lbs, 1500lbs PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 sareng GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN4.0MPA, SANS11123 atanapi SABS11123 atanapi SABS1123 1600kpa, 2500kpa, 4000kpa ratings flange sakumaha per spésifikasi purchaser urang. Pabrikan Flange Weld Neck di Cina - Telepon: 86-21-52859349 Kirim Surat:dhdz@shdhforging.com

Jenis Flange: WN, Threaded, LJ, SW, SO, Buta, LWN,
● Weld beuheung Flanges ngajalin
● Threaded ngajalin Flanges
● Lap Joint ngajalin Flange
● stop kontak Weld ngajalin Flange
● Slip Dina ngajalin Flange
● Buta ngajalin Flange
● Long Weld beuheung ngajalin Flange
● Orifice ngajalin Flanges
● Tontonan ngajalin Flanges
● Leupas ngajalin Flange
● Plate Flange
● Datar Flange
● Oval ngajalin Flange
● Angin Power Flange
● ForgedTube Lambaran
● Adat ngajalin Flange