Plate Flange / Flat Flange Produsén di Shanxi sareng Shanghai, Cina

Lempeng datar flanges mangrupakeun flanges paling umum. Selapkeun tungtung pipa kana flange nu. Plat flange datar sareng pipa dihubungi ku las. Lajeng 2 pipa disambungkeun ku ngalereskeun flate flanges datar ngagunakeun baud, kacangan sarta gaskets. Flanges datar flate cocog pikeun pamakéan dina sistem piping mana rating tekanan relatif lemah sareng fluctuations tekanan, vibrations na osilasi henteu parna.

Ukuran

Ukuran Flange Plate : 1/2"-160"

DN10~DN4000

Nyanghareupan

raray datar raray pinuh (FF), raray diangkat (RF), raray jalu (M), raray bikang (FM), raray létah (T), raray alur (G), ring raray gabungan (RTJ/RJ)

Perlakuan permukaan / palapis

Cat anti karat, Cat Minyak Hideung, Konéng Transparan, Séng Plated, Tiis sareng Hot Dip Galvanized, Golden Varnish Finish

Standar Internasional Flanges DHDZ nyadiakeun:

Standar Amérika
ANSI B16.5
Kelas tekanan: 150 ~ 1200
Ukuran: 1/2"-24"

ASME B16.5
Kelas tekanan 150~1200
Ukuran: 1/2"-24"

ASME B16.47A
Kelas tekanan 150~900
Ukuran: 1/2"-24"

ASME B16.47B
Tekanan Kelas 75~900
Ukuran: 26"-60"

ANSI B16.1
Uni Orifice B16.36
MSS-SP-44
API
AWWA
Tipe
Welding neck, Slip on, Threaded, Lap joint,
Socket weld, Buta, Orifice, Spectacle blind

Standar Jerman
DIN
Tekanan PN6 ~ PN400
Ukuran DN10~DN4000
Tipe
DIN 2527-Buta; PN~PN100
DIN 2566-Screwed: PN10 jeung PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 jeung PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Standar Afrika
Standar
SABS 1123
Tekanan 250kpa ~ 6400kpa
Ukuran: DN10 ~ DN3600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Standar Australia
Standar
AS 2129
Méja: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Ukuran: DN15 ~ DN3000

AS 4087
Tekanan PN16~PN35
Ukuran: DN50 ~ DN1200
Tipe
Buta, Piring, Welding beuheung, Bos ??

Standar Kanada
Standar
CSA Z245.12
Tekanan PN20 ~ PN400
Ukuran: NPS 1/2"-60"

Standar Jepang
Standar
JIS B2220
Tekanan 5K ~ 30K
Ukuran: DN10 ~ DN1500
Tipe
Slip on plate, Slip on hubbed, Socket welding, Las beuheung, Lap joint, Threaded, Buta, Integral

Standar Éropa
Standar
EN 1092-1
Tekanan PN6~PN100
Ukuran: DN10 ~ DN4000
Tipe
Piring, piring leupas, Buta, beuheung las, Hubbed slip on, Hubbed threaded

Standar Britania
Standar
BS 4504
Tekanan PN2.5 ~ PN40
Ukuran: DN10 ~ DN4000

BS 10
Méja: T/A, T/D, T/E, T/F, T/H
Tekanan PN2.5 ~ PN40
Ukuran: 1/2-48"
Tipe
Piring, Longgar, Welding beuheung, Buta,
Hubbed slip on, Hubbed threaded
Integral, polos

Standar Perancis
Standar
NFE 29203
Tekanan PN2.5 ~ PN420
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Italia Standar
Standar
UNI 2276-2278
Tekanan PN6~PN40
Ukuran: DN10 ~ DN600
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Rusia Standar
Standar
GOST 1281
Tekanan PN15~PN2000
Ukuran: DN10 ~ DN2400
Tipe
Buta, piring, beuheung las, longgar,
Integral, Leupaskeun

Standar Cina
Standar
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB / T11694-94, GB / T3766-1996, GB / T11693-94, GB10746-89, GB / T4450-1995, GB / T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406
Tekanan 0.25MPa ~ 10Mpa
Ukuran: DN10 ~ DN1200
Tipe
Buta, Piring, Welding beuheung, Lap joint, Slip on,
Threaded, beuheung las panjang
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB / T9117
HG/T 20592
HG/T 2061
SH/T 3406

Bahan dipaké ku DHDZ:

1. BAJA KARBON - ASTM / ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36

2. STAINLESS STEEL - ASTM / ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A182 Gr F316L A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L

3. Duplex - F-51

4. BAJA PADUHAN: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Produsén, eksportir & supplier of ASME / ANSI B16.5 baja karbon Flanges Plate, stainless steel Plate Flange, alloy steel Plate Flange, ASTM A105 / A105N, A350 LF1, LF2 CL1 / CL2, A694 F42, F46, F48, F50, F52 , F56, F60, F70, A516.60,65,70. Lempeng Flanges Produsén di Shanxi

A182 Gr F304 Lempeng Flange, A182 Gr F 304L Lempeng Flange, A182 Gr F316 Lempeng Flange, A182 Gr F316L Lempeng Flange Produsén, A182 Gr F316Ti Lempeng, A182 Gr F321 Lempeng F1, F321 Lempeng F1 7 Plat Flange, ASTM A182 F5 Plate Flange supplier, ASTM A182 F9 Plate Flange, WNRF Flanges Éksportir Di Shanxi, ASTM A182 F11 Plate Flange suppliers, ASTM A182 F12 Plate Flange, ASTM A182 F22 Plate Flange, ASTM A182 F91 Plate Flange, ASTM A182 F91 Plate Flange, ASTM A182 F91 Plate Flange A350 LF3 Plate Flange, ASTM A350 LF6 Plate Flange Produsén di Shanxi sareng Shanghai

Kami DHDZ ngadamel flanges palsu anu nyumponan standar kualitas internasional:

DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, jsb Urang DHDZ pabrik 75 lbs, 150lbs, 300lbs, 600lbs, 900lbs, 1500lbs, 1500lbs PN6. , 1600kpa, 2500kpa, 4000kpa ratings flange sakumaha per spésifikasi purchaser urang.

Produsén Plate Flange di Cina -Telepon: 86-21-52859349

Kirim Surat:dhdz@shdhforging.com

Jenis Flange:WN, Threaded, LJ, SW, SO, Buta, LWN,

● Weld beuheung Flanges ngajalin

● Threaded ngajalin Flanges

● Lap Joint ngajalin Flange

● stop kontak Weld ngajalin Flange

● Slip Dina ngajalin Flange

● Buta ngajalin Flange

● Long Weld beuheung ngajalin Flange

● Orifice ngajalin Flanges

● Tontonan ngajalin Flanges

● Leupas ngajalin Flange

● plat Flange

● Flat Flange

● Oval ngajalin Flange

● Angin Power Flange

● ForgedTube Lambaran

● Adat ngajalin Flange