Litsebi tsa China Ring Rolled Forgings - Li-cylinders tse Forged - DHDZ
Litsebi tsa China Ring Rolled Forgings - Li-cylinders tse Forged - DHDZ Detail:
Bula Die ForgingsMoetsi oa China
TS'ELISITSOE MOTHO
| Max. OD | Max. Bolelele | Max. Boima ba 'mele |
| 4000mm | 10 000 limilimithara | Lithane tse 30 |
DHDZ e etsa li-cylinders tse se nang sekoli, li-cylinders tse sekoti le matsoho ka mefuta e fapaneng ea litlhophiso ho latela litlhoko tsa bareki. Likoti tse se nang seamless li loketse lits'ebetso tsa khatello e phahameng ea maikutlo le tikoloho e thata ka lebaka la ho tšoarella ha tsona, matla le ho hanyetsa kutu. Likoti li ka hlahisoa eseng feela ka sebopeho se otlolohileng sa cylindrical, empa ka mefuta e sa lekanyetsoang ea li-OD le li-ID, ho kenyelletsa le li-tapers.
Ho feta moo, DHDZ e fana ka ts'ebetso eohle e tlase ho kenyelletsa kalafo ea mocheso, mochini oa mochini le tlhahlobo e sa senyeheng, ha e kopa. Ikopanye le rona kajeno ka litlhaloso tsa hau hantle, sehlopha sa rona se tla sebetsa le uena ho sebelisa bokhoni ba rona ho fokotsa litšila le ho fokotsa ho se sebetse hantle ha ts'ebetso.
Lintho tse sebelisoang tse tloaelehileng: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 |22NiCrMoV| EN 1.4201 |42CrMo4
Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., joalo ka moetsi ea ngolisitsoeng oa ISO ea netefalitsoeng, o tiisa hore liforomo le / kapa mekoallo li ts'oana ka boleng ebile ha li na anomalies tse kotsi ho thepa ea mochini kapa thepa ea machining.
Taba: Steel Grade AISI 4130 Alloy Steel (UNS G41300)
Lintho Tsa 'Mele
| Thepa | Metric | Mperial |
| Botenya | 7.85 g/cm3 | 0.284 lb/in³ |
| Sebaka se qhibilihang | 1432°C | 2610°F |
AISI 4130 Alloy Steel Litlhaloso le Lintho tse lekanang
| AISI 4130 | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | Mo |
| 0.280 - 0,330 | 0.40 - 0,60 | 0.15 - 0.30 | 0.030 boholo | 0.040 boholo | 0.80-1.10 | 0.15-0,25 | 0.25 max | 0.35 max | 0.15-0,25 |
| ASTM A29/A29M | DIN17350 | JIS G4404 | GB/T 1229 | ISO 683/18 |
| AISI 4130/ G41300 | 1.7218/25CrMo4 | SMN420 | 25CrMo4 | 25CrMo4 |
Lisebelisoa
Libaka tse ling tse tloaelehileng tsa ts'ebeliso ea AISI 4130:
Liindasteri tsa oli le khase - joalo ka 'mele oa li-valve le lipompo
Lifofane tsa khoebo, enjine ea lifofane e ea phahama
Lifofane tsa sesole
Tsa makoloi
Lisebelisoa tsa mochini
Lisebelisoa tsa Hydraulic
Peiso ea likoloi
Sepakapaka
Liindasteri tsa temo le tshireletso jj.
AISI 4130 Forged Cylinder , Low alloy Steel forgings bakeng sa liindasteri tsa oli le khase.
Boima: φ774.8 0xφ317.0XH825.5mm
Thepa le Phekolo ea Mocheso
Machinability - AISI 4130 tšepe e ka etsoa habonolo ka mekhoa e tloaelehileng. Leha ho le joalo, machining e ba thata ha boima ba tšepe bo ntse bo eketseha.
Ho etsoa ha tšepe ea AISI 4130 ho ka etsoa maemong a annealed.
● Welding ea tšepe ea AISI 4130 e ka etsoa ka mekhoa eohle ea khoebo.
● Phekolo ea Mocheso - AISI 4130 tšepe e futhumala ho 871 ° C (1600 ° F) ebe e tima ka oli. Hangata tšepe ena e phekoloa mocheso ka mocheso ho tloha ho 899 ho ea ho 927 ° C (1650 ho ea ho 1700 ° F).
● Ho theha tšepe ea AISI 4130 ho ka etsoa ho 954 ho 1204 ° C (1750 ho 2200 ° F).
● Ho sebetsa ho chesang ha tšepe ea AISI 4130 ho ka etsoa ho 816 ho 1093 ° C (1500 ho 2000 ° F).
● AISI 4130 tšepe e ka batang e sebetsa ka mekhoa e tloaelehileng.
● AISI 4130 tšepe e ka kenngoa ka 843 ° C (1550 ° F) e lateloa ke ho pholile ha moea ka 482 ° C (900 ° F).
● Ho futhumatsa ha tšepe ea AISI 4130 ho ka etsoa ho 399 ho 566 ° C (750 ho 1050 ° F), ho itšetlehile ka matla a batlang a matla.
● Ho thatafala ha tšepe ea AISI 4130 ho ka etsoa ka ho sebetsa ha serame kapa mocheso oa mocheso.
Tse ling tsa lits'ebetso tse kholo tsa AISI 4130 alloy steel li teng ka har'a li-enjene tsa sefofane le li-tubing tse cheselitsoeng.
Ho Forging (Mosebetsi o Chesang) Itloaetse , Mokhoa oa Phekolo ea Mocheso
| Ho qapa | 1093-1205 ℃ |
| Anealing | 778-843 ℃ sebōpi se pholileng |
| Ho halefisa | 399-649 ℃ |
| Ho tloaeleha | 871-898 ℃ moea o pholileng |
| Austenize | 815-843 ℃ ho tima metsi |
| Fokotsa Khatello | 552-663 ℃ |
| Ho tima | 552-663 ℃ |
| Rm - Matla a tsitsitseng (MPa) (Q +T) | ≥930 |
| Rp0.2 0.2% matla a bopaki (MPa) (Q +T) | ≥785 |
| KV - Matla a Impact (J) (Q +T) | +20 ° |
| A - Min. elongation at fracture (%)(Q +T) | ≥12 |
| Z - Phokotso ea karolo ea sefapano ho robeha (%)(N+Q +T) | ≥50 |
| Brinell hardness (HBW): (Q +T) | ≤229HB |
TLHAHISOLESELING E 'NGOE
KOPO LEKHOTSO
KAPA BITSA: 86-21-52859349
4130
New-4130-Alloy-Steel
Litšoantšo tsa lintlha tsa sehlahisoa:
Tataiso e Amanang ea Sehlahisoa:
Re fana ka matla a maholo ka boleng le nts'etsopele, thekiso, thekiso le papatso le ts'ebetso ea Professional China Ring Rolled Forgings - Forged Cylinders - DHDZ , Sehlahisoa se tla fana ka lefats'e ka bophara, joalo ka: Cologne, Nigeria, Detroit, Re beha tsamaiso e tiileng ea taolo ea boleng. Re na le pholisi ea ho khutlisa le ho fapanyetsana, 'me u ka fapanyetsana ka hare ho matsatsi a 7 ka mor'a hore u fumane li-wigs haeba li le seteisheneng se secha' me re fana ka litšebeletso tsa ho lokisa mahala bakeng sa lihlahisoa tsa rona. Ka kopo ikutloe u lokolohile ho ikopanya le rona bakeng sa tlhaiso-leseling e batsi 'me re tla u fa lenane la litheko tsa tlholisano ka nako eo.
Ka olivier musset ho tloha luzern - 2017.07.28 15:46 Khoebo e na le chelete e matla le matla a tlhōlisano, sehlahisoa se lekane, se ka tšeptjoa, kahoo ha re na matšoenyeho ka ho sebelisana le bona.
Ka Sabrina ho tloha Moscow - 2018.06.18 19:26 Lihlopha tsa lihlahisoa
-
Theko e tlase Socket-Weld Pipe Flanges - Weld N...
-
Bahoebi ba Forge Blocks - Forged Blo...
-
Thekiso e Chesang ea Pile Steel End Plate Flange - Bakeng sa...
-
OEM Manufacturer Weldneck Flange - Lap Joint F...
-
Lisebelisoa tsa tšepe tsa boleng bo holimo tsa tšepe tse sa hloekang - tse entsoeng...
-
Setumo se phahameng Socket Welding Orifice Flange -...
