China Setumo se Molemo sa Mosebelisi bakeng sa Mounted Connector - Libaka tse Forged - DHDZ Manufacture & Supplier

Setumo se setle sa Mosebelisi bakeng sa Mounted Connector - Libaka tse Forged - DHDZ

Setumo se Ntle sa Mosebelisi bakeng sa Mounted Connector - Libara tse Forged - Setšoantšo se Featured sa DHDZ

Tlhaloso e Khutšoanyane:

Re romelle lengolo-tsoibila Khoasolla joalo ka PDF

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

E Amanang le Video

Maikutlo (2)

Hape re u fa litšebeletso tsa litsebi tsa ho fumana lihlahisoa le ho kopanya lifofane. Re na le yuniti ea rona ea tlhahiso le khoebo ea ho fumana thepa. Re ka u fa mefuta e fapaneng ea thepa e amanang le mefuta ea rona ea thepa bakeng saPlate Flange, Ss304l/316l Lap Joint Flanged, Li-Flange tsa tšepe e sa hloekang ea 304l, Ka kopo u se ke ua tsilatsila ho ikopanya le rona haeba u thahasella lihlahisoa tsa rona. Re lumela ka tieo hore lihlahisoa tsa rona li tla etsa hore u khotsofale.

Setumo se setle sa Mosebelisi bakeng sa Mounted Connector - Libaka tse Forged - Lintlha tsa DHDZ:

Open Die Forgings Manufacturer in China

Libaka tse Forged

Li-Bars tsa Forged1
Li-Bars tsa Forged2

Lintho tse sebelisoang tse tloaelehileng: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 | 42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 |22NiCrMoV12

TS'OETSE BABA PEPO
Libaka tse pota-potileng, li-Square bar, li-Flat bar le li-bar tsa Hex. All Metals e na le bokhoni ba ho theha mekoallo ho tsoa mefuteng e latelang ea alloy:
● tšepe ea motsoako
● Tšepe ea carbon
● Tšepe e sa hloekang

SEBELISA BABARE MAKHONO

HLALELE

BOHLALE BOHLOKOA

MAKHELO MOTHO

Carbon, Alloy

1500 limilimithara

26000 lik'hilograma

Ts'epe e sa beng le mabali

800 limilimithara

20000 lik'hilograma

SEBELISA BABARE MAKHONO
Bolelele bo phahameng ba mekoallo e pota-potileng e entsoeng le li-hex bar ke 5000 mm, ka boima bo boholo ba 20000 kgs.
Bolelele le bophara bo boholo bakeng sa mekoallo e bataletseng le mekoallo ea lisekoere ke 1500mm, ka boima bo boholo ba 26000 kgs.

Sebaka se entsoeng ka maiketsetso kapa bar e phuthoang e hlahisoa ka ho nka ingot le ho e fokotsa ho fihlela boholo, ka kakaretso, lifolete tse peli tse hanyetsanang li shoa. Litšepe tse entsoeng li atisa ho ba matla, ho thatafala le ho tšoarella ho feta liforomo tse entsoeng kapa likarolo tse entsoeng ka mochine. U ka fumana sebopeho sa lijo-thollo tse betliloeng likarolong tsohle tsa forgings, ho eketsa bokhoni ba likarolo tsa ho mamella ho loana le ho roala.

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., joalo ka moetsi ea ngolisitsoeng oa ISO ea netefalitsoeng, e tiisang hore forgings le / kapa mekoallo li ts'oana ka boleng ebile ha li na anomalies tse kotsi ho thepa ea mochini kapa thepa ea machining.

Taba:
Kereiti ea tšepe EN 1.4923 X22CrMoV12-1
Sebopeho sa Martensitic

Sebopeho sa lik'hemik'hale % ea tšepe X22CrMoV12-1 (1.4923): EN 10302-2008
C	Si	Mn	Ni	P	S	Cr	Mo	V
0.18 - 0,24	boholo 0.5	0.4 - 0.9	0.3 - 0.8	boholo ba 0.025	boholo 0.015	11 - 12,5	0.8 - 1.2	0.25 - 0,35

Lisebelisoa
Powerplant, Boenjiniere ba Mechini, Ho hlahisa matla.
Likarolo tsa liphaephe, li-boilers tsa mouoane le li-turbine.

Foromo ea thomello
Round bar, Rolled Forgings Rings, Bored roundbars, X22CrMoV12-1 Forged bar
Boholo: φ58x 536L limilimithara.

Ho Forging (Hot Work) Itloaetse

Lisebelisoa li kenngoa ka sebōping 'me li futhumatsoa. Ha mocheso o fihla ho 1100 ℃, tšepe e tla etsoa. E bua ka ts'ebetso efe kapa efe ea mochini e etsang hore tšepe e oele e le 'ngoe kapa ho feta, mohlala, e bulehileng / e koetsoeng ea forging, extrusion, rolling, joalo-joalo. Nakong ea ts'ebetso ena, mocheso oa tšepe oa theoha. Ha e theohela ho 850 ℃, tšepe e tla futhumatsoa hape. Ebe u pheta mosebetsi o chesang ka mocheso oo o phahameng (1100 ℃). Tekanyo e fokolang ea karo-karolelano ea mosebetsi o chesang ho tloha ho ingot ho ea ho billet ke 3 ho isa ho 1.

Mokhoa oa Phekolo ea Mocheso

Laola thepa ea machining ea preheat ho furance ea kalafo ea mocheso. Mocheso ho isa ho 900 ℃. Tšoara mocheso ka lihora tse 6 metsotso e 5. Oli tima le ho halefa ka 640 ℃. Joale Air-pholile.

Thepa ea mochini ea X22CrMoV12-1 bareng ea fored (1.4923).

Rm - Matla a tsitsitseng (MPa) (+QT)	890
Rp0.20.2% matla a bopaki (MPa) (+QT)	769
KV - Matla a Impact (J) (+QT)	-60 ° 139
A - Min. elongation ha ho robeha (%) (+QT)	21
Brinell hardness (HBW): (+A)	298

Litefiso life kapa life, ntle le tse boletsoeng ka holimo, li ka etsoa ho latela tlhoko ea moreki.

Litšoantšo tsa lintlha tsa sehlahisoa:

Tataiso e Amanang ea Sehlahisoa:

Re na le bareki ba bangata ba hloahloa ba hloahloa ho phahamiseng, QC, le ho sebetsa ka mefuta ea mathata a thata ka har'a mokhoa oa moloko bakeng sa Setumo se Molemo sa Mosebelisi bakeng sa Mounted Connector - Forged Bars - DHDZ , Sehlahisoa se tla fana ka lefats'e ka bophara, joalo ka: Liberia, Georgia, Nepal, Re tla fana ka lihlahisoa tse betere haholo tse nang le meralo e fapaneng le lits'ebeletso tsa litsebi. Ka nako e ts'oanang, amohela liodara tsa OEM, ODM, mema metsoalle lapeng le kantle ho naha hammoho nts'etsopele e tšoanang 'me u fihlelle katleho, bots'epehi, le ho holisa menyetla ea khoebo! Haeba u na le potso leha e le efe kapa u hloka boitsebiso bo eketsehileng ka kōpo ikutloe u lokolohile ho ikopanya le rona. Re labalabela ho fumana lipotso tsa hau haufinyane.

Alloy Steel

Anticorrosion Flange

Theko e tlaase A182 F310 Stainless Steel Flange

Likarolo Tse Hlophisitsoeng

Customized Forging Disc

Mochini oa ho theha

Ho theha Likheo tsa tšepe

Bula Die Forged

Socket Welding Orifice Flange

Stainless Steel Companion Flange

Sebelisana le uena nako le nako e atleha haholo, e thabile haholo. Re tšepa hore re ka ba le tšebelisano e eketsehileng!

Ka Doreen oa Iran - 2017.06.22 12:49

Ka boikutlo bo botle ba "mabapi le 'maraka, ho nka tloaelo, ho sheba saense", khampani e sebetsa ka mafolofolo ho etsa lipatlisiso le nts'etsopele. Re tšepa hore re na le likamano tsa khoebo nakong e tlang le ho finyella katleho e tšoanang.

Ka Paula oa Denmark - 2017.05.02 11:33

Ngola molaetsa wa hao mona mme o re romele wona