Libaka tse Forged
Open Die Forgings Manufacturer in China
Libaka tse Forged
Lintho tse sebelisoang tse tloaelehileng: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 |22NiCrMoV12
TS'ETSOE BARA LIPOPO
Libaka tse pota-potileng, li-Square bar, li-Flat bar le li-bar tsa Hex. All Metals e na le bokhoni ba ho theha mekoallo ho tsoa mefuteng e latelang ea alloy:
● tšepe ea motsoako
● Tšepe ea carbon
● Tšepe e sa hloekang
SEBELISA BARE MAKHONO
HLALELE
BOHLALE BOHLOKOA
MAKHELO MOTHO
Khabone, Alloy
1500 limilimithara
26000 lik'hilograma
Ts'epe e sa beng le mabali
800 limilimithara
20000 lik'hilograma
SEBELISA BARE MAKHONO
Bolelele bo phahameng ba mekoallo e pota-potileng e entsoeng le li-hex bar ke 5000 mm, ka boima bo boholo ba 20000 kgs.
Bolelele le bophara bo boholo bakeng sa mekoallo e bataletseng le mekoallo ea lisekoere ke 1500mm, ka boima bo boholo ba 26000 kgs.
A sekoaelo se foritsoeng kapa sepitikolohoe hlahisoa ka ho nka ingot leforgingHo theosa ka boholo, ka kakaretso, lifolete tse peli tse hanyetsanang lia shoa. Litšepe tse entsoeng li atisa ho ba matla, ho thatafala le ho tšoarella ho feta liforomo tse entsoeng kapa likarolo tse entsoeng ka mochine. U ka fumana sebopeho sa lijo-thollo tse betliloeng likarolong tsohle tsa forgings, ho eketsa bokhoni ba likarolo tsa ho mamella ho loana le ho roala.
Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., joalo ka moetsi ea ngolisitsoeng oa ISO ea netefalitsoeng, e tiisang hore forgings le / kapa mekoallo li ts'oana ka boleng ebile ha li na anomalies tse kotsi ho thepa ea mochini kapa thepa ea machining.
Taba:
Kereiti ea tšepeEN 1.4923 X22CrMoV12-1
SebopehoMartensitic
Sebopeho sa lik'hemik'hale % ea tšepe X22CrMoV12-1 (1.4923): EN 10302-2008 | ||||||||
C | Si | Mn | Ni | P | S | Cr | Mo | V |
0.18 - 0,24 | boholo 0.5 | 0.4 - 0.9 | 0.3 - 0.8 | boholo ba 0.025 | boholo 0.015 | 11 - 12,5 | 0.8 - 1.2 | 0.25 - 0,35 |
Lisebelisoa
Powerplant, Boenjiniere ba Mechini, Ho hlahisa matla.
Likarolo tsa liphaephe, li-boilers tsa mouoane le li-turbine.
Foromo ea thomello
Round bar, Rolled Forgings Rings, Bored roundbars, X22CrMoV12-1 Forged bar
Boholo: φ58x 536L limilimithara.
Ho Forging (Hot Work) Itloaetse
Lisebelisoa li kenngoa ka sebōping 'me li futhumatsoa. Ha mocheso o fihla ho 1100 ℃, tšepe e tla etsoa. E bua ka ts'ebetso efe kapa efe ea mochini e etsang hore tšepe e oele e le 'ngoe kapa ho feta, mohlala, e bulehileng / e koetsoeng ea forging, extrusion, rolling, joalo-joalo. Nakong ea ts'ebetso ena, mocheso oa tšepe oa theoha. Ha e theohela ho 850 ℃, tšepe e tla futhumatsoa hape. Ebe u pheta mosebetsi o chesang ka mocheso oo o phahameng (1100 ℃). Tekanyo e fokolang ea karo-karolelano ea mosebetsi o chesang ho tloha ho ingot ho ea ho billet ke 3 ho isa ho 1.
Mokhoa oa Phekolo ea Mocheso
Laola thepa ea machining ea preheat ho furance ea kalafo ea mocheso. Mocheso ho isa ho 900 ℃. Tšoara mocheso ka lihora tse 6 metsotso e 5. Oli tima le ho halefa ka 640 ℃. Joale Air-pholile.
Thepa ea mochini ea X22CrMoV12-1 bareng ea fored (1.4923).
Rm- Matla a tsitsitseng (MPa) (+QT) | 890 |
Rp0.20.2% matla a bopaki (MPa) (+QT) | 769 |
KV- Matla a amang (J) (+QT) | -60 ° 139 |
A - Min. elongation ha ho robeha (%) (+QT) | 21 |
Brinell hardness (HBW): (+A) | 298 |
Litefiso life kapa life, ntle le tse boletsoeng ka holimo, li ka etsoa ho latela tlhoko ea moreki.