Lap Joint Forged Flange Manifattur fiċ-Ċina

Lap Joint Forged Flanġis Manifattur f'Shanxi u Shanghai, iċ-Ċina
Flanġijiet tal-Pipe Joint Lap. Il-flanġijiet tal-pajpijiet tal-ġonta tal-ħoġor jiżżerżqu direttament fuq il-pajp u huma l-aktar użati b'mod komuni ma 'fittings tat-tarf stub. Pajp huwa ġeneralment iwweldjat mat-Tmif Stub u l-flanġ tal-pajp tal-Lap Joint huwa liberu li jdur madwar it-tarf tal-istub. ... Daqsijiet 'il fuq minn 24" huma prodotti bħala ġonot tal-ħoġor biex jiżolqu fuq dimensjonijiet.

Daqs
Daqs tal-ħanek tal-ġonta tal-ħoġor: 1/2”-160”
DN10 ~ DN4000

Niffaċċjaw
Wiċċ Ċatt Wiċċ sħiħ (FF), Wiċċ Mgħolli (RF), Face Male (M), Face Female (FM), Face Tongue (T), Face Groove (G), Face Joint Ring (RTJ/ RJ).

Trattament tal-wiċċ /Kisi
Żebgħa kontra s-sadid, Żebgħa taż-Żejt Iswed, Isfar Trasparenti, Żingu Plated, Galvanizzat kiesaħ u sħun, Finish Golden Verniċ.

Flanġijiet Standard Internazzjonali DHDZ jipprovdi:

Standard Amerikan
ANSI B16.5
Klassi tal-Pressjoni: 150 ~ 1200
Daqs: 1/2”-24”

ASME B16.5
Klassi ta 'Pressjoni 150 ~ 1200
Daqs: 1/2”-24”

ASME B16.47A
Klassi ta 'Pressjoni 150 ~ 900
Daqs: 1/2”-24”

ASME B16.47B
Klassi ta 'pressjoni 75 ~ 900
Daqs: 26”-60”

ANSI B16.1
Orifiċju Unjoni B16.36
MSS-SP-44
API
AWWA
Tip
Għonq tal-welding, Slip on, bil-kamin, ġonta tal-ħoġor,
Socket Weld, Blind, Orifice, Spectacle blind

Standard Ġermaniż
DIN
Pressjoni PN6 ~ PN400
Daqs DN10 ~ DN4000
Tip
DIN 2527-Għomja; PN~PN100
DIN 2566-Invita: PN10 u PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 u PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Standard Afrikan
Standard
SABS 1123
Pressjoni 250kpa ~ 6400kpa
Daqs: DN10 ~ DN3600
Tip
Għomja, Pjanċa, Għonq tal-welding, Laxka,
Integrali, Slip fuq

Standard Awstraljan
Standard
AS 2129
Tabella: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Daqs: DN15 ~ DN3000

AS 4087
Pressjoni PN16 ~ PN35
Daqs: DN50 ~ DN1200
Tip
Blind, Pjanċa, għonq tal-welding, Boss

Standard Kanadiż
Standard
CSA Z245.12
Pressjoni PN20 ~ PN400
Daqs: NPS 1/2”-60”

Standard Ġappuniż
Standard
JIS B2220
Pressjoni 5K ~ 30K
Daqs: DN10 ~ DN1500
Tip
Slip on plate, Slip on hubbed, Socket welding, għonq tal-welding, Lap joint, bil-kamin, Għomja, Integrali

Standard Ewropew
Standard
EN 1092-1
Pressjoni PN6 ~ PN100
Daqs: DN10 ~ DN4000
Tip
Pjanċa, Pjanċa maħlula, Għomja, Għonq tal-welding, Żlieq imbuttat fuq, Hubbed bil-kamin

Standard Brittaniku
Standard
BS 4504
Pressjoni PN2.5 ~ PN40
Daqs: DN10 ~ DN4000
BS 10
Tabella: T/A, T/D, T/E,T/F, T/H
Pressjoni PN2.5 ~ PN40
Daqs: 1/2 ~ 48”
Tip
Pjanċa, Laxka, Għonq tal-welding, Għomja,
Hubbed slip fuq, Hubbed bil-kamin
Integrali, Plain

Standard Franċiż
Standard
NFE 29203
Pressjoni PN2.5 ~ PN420
Daqs: DN10 ~ DN600
Tip
Għomja, Pjanċa, Għonq tal-welding, Laxka,
Integrali, Slip fuq

Italja Standard
Standard
UNI 2276-2278
Pressjoni PN6 ~ PN40
Daqs: DN10 ~ DN600
Tip
Għomja, Pjanċa, Għonq tal-welding, Laxka,
Integrali, Slip fuq

Standard tar-Russja
Standard
GOST 1281
Pressjoni PN15 ~ PN2000
Daqs: DN10 ~ DN2400
Tip
Għomja, Pjanċa, Għonq tal-welding, Laxka,
Integrali, Slip fuq

Standard Ċiniż
Standard
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Pressjoni 0.25MPa ~ 10Mpa
Daqs: DN10 ~ DN1200
Tip
Għomja, Pjanċa, Għonq tal-welding, Ġonta tal-ħoġor, Slip on,
Bil-kamin, Għonq twil tal-welding
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Materjali użati minn DHDZ:
AZZAR TAL-KARBONJU - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM/ASME A182 Gr F304 , A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316N Gr, A182 Gr F316N Gr, A182 F316LN, A182 Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310L, 309 310L, ,
Duplex - F-51
AZZAR LIGA: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Manifattur, esportatur u fornitur ta 'ASME/ANSI B16.5 azzar tal-karbonju Weld Neck Flanges, stainless steel Weld Neck Flange, azzar liga Weld Neck Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46,F48, F50, F52, F56, F60, F70, A516.60,65,70. Fabbrikant tal-Flanges WNRF f'Shanxi.

A182 Gr F304 Lap Joint Flanġ, A182 Gr F 304L Weld Neck Flanġ, A182 Gr F316 Weld Neck Flanġ, A182 Gr F316L Weld Neck Flange Manifattur, A182 Gr F316Ti Weld Neck, A182 Gr F321 Weld Neck Flange, Weld Neck Flange, F316L Weld Flange A182 Gr F347 Weld Neck Flange, ASTM A182 F5 Weld Neck Flange fornitur, ASTM A182 F9 Weld Neck Flange, WNRF Flanġis Esportatur F'Shanxi, ASTM A182 F11 Weld Neck Flange fornituri, ASTM A182 F12 Flanġ tal-għonq tal-weldjaturas, ASTM A182 F22 Weld Neck Flange, ASTM A182 F91 Weld Neck Flange, ASTM A350 LF2 Weld Neck Flange, ASTM A350 LF3 Weld Neck Flange, ASTM A350 LF6 Weld Neck Flange Manifattur f'Shanxi u Shanghai.

Aħna DHDZ jimmanifatturaw flanġi foloz li jissodisfaw l-istandard internazzjonali tal-kwalità: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, eċċ Aħna DHDZ jimmanifatturaw 75 lbs, 150lbs , 300lbs, 600lbs, 900lbs, 1500lbs, 2500lbs, PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 u GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, jew SAN2.5MPA1, SAN2.5MPA1, PN2. SABS 1123, 600kpa, 1000kpa, 1600kpa, 2500kpa, klassifikazzjonijiet tal-ħanek 4000kpa skont l-ispeċifikazzjoni tax-xerrej. Manifattur tal-ħanek tal-għonq tal-weldjatura fiċ-Ċina - Ċempel :86-21-52859349 Ibgħat Mail:dhdz@shdhforging.com

Tipi ta 'Flanges: WN, bil-kamin, LJ, SW, SO, Blind, LWN,
● Flanġijiet tal-Weldjatura tal-Għonq Forged
● Flanġijiet Forged bil-kamin
● Lap Joint Forged Flanġ
● Socket Weld Forged Flanġ
● Slip Fuq Flanġ Forged
● Flanġ Forged Blind
● Flanġ falsifikat bl-għonq tal-weldjatura twila
● Flanġijiet Forged Orifice
● Flanġijiet Falsifikati tal-Nuċċalijiet
● Flanġ Falsifikat Sfużi
● Flanġ tal-Pjanċa
● Flanġ Ċatt
● Flanġ Ovali Forged
● Flanġ tal-Enerġija mir-Riħ
● Folja ForgedTube
● ħanek falsifikati PERSONALI