Plate Flang / Flat LABIUM Fabricante in Shanxi et Shanghai, China

Laminae flanges planae sunt flanges frequentissimae. Finem inserere fistulae in LABIUM. Plate plana flange et fistula glutino continguntur. Inde 2 fistulae planae flanges planae figendo connectuntur utentes fulmine, nucibus et gaskets. Flate flanges planae usui aptae sunt in limbis systematis ubi pressionis pressionis est relative humilis et pressionis fluctuationes, vibrationes et oscillationes non sunt graves.

Magnitudo

Plate Flanges Size: 1/2"-160"

DN10~DN4000

Adversus

Faciem tuam (FF), Faciem (FF), Faciem (RF), Male Faciem (M), Faciem Male (FM), Faciem Linguam (T), Faciem sulcam (G), Ringam Faciem Faciem (RTJ/RJ)

Superficiem / Coating Curatio

Anti-rubiginem Pingere, Oleum Nigrum Pingere, Flavum Perspicuum, Zinc Plated, Frigidum et Hot Dip Galvanized, Aureum Varnish Perago

International Standard Flanges DHDZ praebet:

Amercian Standard
ANSI B16.5
Pressura Classis: CL~ MCC
Magnitudine: 1/2"-24"

ASME B16.5
Pressura Classis CL~ MCC
Magnitudine: 1/2"-24"

ASME B16.47A
Pressura Classis CL ~ CM
Magnitudine: 1/2"-24"

ASME B16.47B
Pressura Classis LXXV ~ CM
Size: 26"-60"

ANSI B16.1
Unio orificium B16.36
MSS-SP-44
API
AWWA
Type
Collum welding, Labi, Threaded, Articulus Lap.
Socket pugil , caeci , orificium , spectaculum caecum

German Standard
DIN
Pressura PN6 ~ PN400
Magnitudo DN10~DN4000
Type
DIN 2527-Caecus; PN~PN100
DIN 2566-Screwed: PN10 et PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 et PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

African Standard
Standard
SABS 1123
Pressura 250kpa~6400kpa
Size: DN10~ DN3600
Type
Caeca, lamella, welding neck, solve ;
Integral, Slip on

Australian Standard
Standard
AS 2129
Tabulae: T/A, T/D, T/E, T/F, T/H.
T/J, T/K, T/R, T/S, T/T.
Size: DN15~ DN3000

AS 4087
Pressura PN16~ PN35
Size: DN50~ DN1200
Type
Caeca, Plate, Welding collum, Duce ??

Canadian Standard
Standard
CSA Z245.12
Pressura PN20 ~ PN400
Size: NPS 1/2"-60"

Iaponica Standard
Standard
JIS B2220
Pressura 5K ~ 30K
Magnitudine: DN10~ DN1500
Type
Labi super laminam, Labi in hubbed, Socket welding, Welding neck, Lap iuncturam, Threaded, Caecum, Integral

Standard
Standard
EN 1092-1
Pressura PN6 ~ PN100 "
Magnitudine: DN10~ DN4000
Type
Patina, laxa lamella, caeca, Welding collum, Hubbed lapsus super, Hubbed staminea

Latin
Standard
BS 4504
Pressura PN2.5~ PN40
Magnitudine: DN10~ DN4000

BS 10
Tabula: T/A, T/D, T/E, T/F, T/H
Pressura PN2.5~ PN40
Magnitudine: 1/2~ 48"
Type
Lamina, solve, collum, caeca,
Hubbed lapsus , Hubbed stamineus
Integer

French Standard
Standard
NFE 29203
Pressura PN2.5~ PN420
Magnitudine: DN10~ DN600
Type
Caeca, lamella, welding neck, solve ;
Integral, Slip on

Italia Standard
Standard
UNI 2276-2278
Pressura PN6 ~ PN40 "
Magnitudine: DN10~ DN600
Type
Caeca, lamella, welding neck, solve ;
Integral, Slip on

Russia Standard
Standard
GOST 1281
Pressura PN15~ PN2000
Size: DN10~ DN2400
Type
Caeca, lamella, welding neck, solve ;
Integral, Slip on

Chinese Standard
Standard
GB9112-2000
GB9113-2000～GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1013
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Pressura 0.25MPa~10Mpa
Size: DN10~ DN1200
Type
Caecus, lamella, welding Collum, Lap junctura, Labi ;
Post, collo glutino longo
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Materies per DHDZ:

1. CARBON FERRUM - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36

2. STEEL - ASTM/ASME A182 Gr F304, A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A182 Gr F316N, A182 Gr F316LN, A182 Gr F316LN, A182 Gr F316LN, A182 Gr F316L. F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L 309 310, 310H, 904L

3. Duplex - F-51

4. STIRPS FERRUM: A-182-F-1, F-5, F-6, F-9, F-11, F-XII, F-XXII.

Manufacturer, exporter & supplementum ASME/ANSI B16.5 Ferri carbonis Plate Flanges, chalybs immaculata Plate Flange, stannum chalybs Plate Flange, ASTM A105/A105N, A350 LF1, LF2 CL1/CL2, A694 F42, F46, F48, F50, F52 , F56, F60, F70, A516.60,65,70. Plate Flanges Manufacturer in Shanxi

A182 Gr F304 Plate Flange, A182 Gr F304 Plate Flange, A182 Gr F316 Plate Flange, A182 Gr F316L Plate Flange, A182 Gr F316 Plate, A182 Gr F321 Plate Flange, A182 Gr F321 Plate Flange, A182 Gr F316L Plate Flange, A182 Gr F316 Plate, A182 Gr F321 Plate Flange, A182 A182 F5 Plate Flanges supplier, ASTM A182 F9 Plate Flanges, WNRF Flanges Exporter In Shanxi, ASTM A182 F11 Plate Flanges suppliers, ASTM A182 F12 Plate Flanges, ASTM A182 F22 Plate Flanges, ASTM A182 F91 Plate Flanges, ASTM A182 F12 Plate Flanges, ASTM A182 F22 Plate Flanges, ASTM A182 F91 Plate Flanges, LF ASTM A182 F12 Plate Flanges A350 LF3 Plate Flange, ASTM A350 LF6 Plate Flange Fabricator in Shanxi et Shanghai

Nos DHDZ fabricare flanges fabricare, quae vexillum quale internationale conveniant;

DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, etc DHDZ fabricamus 75 libras, 150lbs, 300lbs, 600lbs, 900lbs, 1500lbs, 2500lbs; PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 et GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN4.0MPA, SANS1123 uel SABS 1123, 600kpa, 1000kpa , 1600kpa, 2500kpa, 4000kpa ratings LABIUM sicut per specificationem emptoris.

Plate Flange Fabrica in Sina -Call : 86-21-52859349

Mittere epistulam:dhdz@shdhforging.com

Genera Flangum:WN, Threaded, LJ, SW, SO, Caeci LWN,

Weld Collum Forged Flanges

Threaded Forged Flanges

Lap Join Forged Flange

Socket Weld Forged Flange

Labi de Forged Flange

Caecus Forged Flange

Long Weld Collum Forged LABIUM

Orificium Forged Flanges

Spectaculum Forged Flanges

solve Forged Flange

Plate Flange

Flat Flange

Oval Forged Flange

Ventus Power Flange

ForgedTube Sheet

CUSTOM COMMENDATUS LABIUM