Akụkọ ụlọ ọrụ

  • Usoro nrụpụta Forging

    Usoro nrụpụta Forging

    A na-ekewakarị ịgha ahịhịa dabere na ọnọdụ okpomọkụ a na-eme ya—oyi, ọkụ, ma ọ bụ nke na-ekpo ọkụ. Enwere ike ịgha ọla dị iche iche.
    GỤKWUO
  • Kedu ihe bụ isi akụrụngwa maka ịwa?

    Kedu ihe bụ isi akụrụngwa maka ịwa?

    Enwere ụdị akụrụngwa dị iche iche n'ịrụpụta ihe. Dabere na ụkpụrụ ịkwọ ụgbọ ala dị iche iche na njirimara teknụzụ, enwere ụdị ndị a: akụrụngwa na-akpụ akpụ nke hama, ọkụ anwụ anwụ anwụ, pịa free, igwe na-akpụ akpụ, igwe hydraulic ...
    GỤKWUO
  • Gịnị bụ usoro n'ichepụta anwụ forgings?

    Gịnị bụ usoro n'ichepụta anwụ forgings?

    Die forging bụ otu n'ime ndị nkịtị akụkụ na-akpụ machining ụzọ na aruwo usoro. Ọ dị mma maka ụdị nhazi nnukwu batch. Usoro nke ịnwụ anwụ bụ usoro mmepụta ihe dum nke oghere na-eme ka ọ bụrụ ịnwụ anwụ site na usoro nhazi usoro.The die forging proc ...
    GỤKWUO
  • Imeziwanye plasticity nke forgings na ibelata nguzogide nrụrụ

    Imeziwanye plasticity nke forgings na ibelata nguzogide nrụrụ

    Iji mee ka ọ dị mfe ịgbapụta oghere oghere ígwè, enwere ike ịme ihe ezi uche dị na ya iji belata nrụrụ nrụrụ ma chekwaa ike nke akụrụngwa. N'ozuzu, a na-anabata ụzọ ndị a iji nweta: 1) mara njirimara nke ihe eji akpụ akpụ, wee họrọ nrụrụ ezi uche dị na ya.
    GỤKWUO
  • Nrụpụta ụlọ ọrụ mmepụta ihe

    Nrụpụta ụlọ ọrụ mmepụta ihe

    A na-eji igwe nrịbama ma ọ bụ hama na-akwado site na ikuku mkpakọ, ọkụ eletrik, hydraulics ma ọ bụ uzuoku. Hama ndị a nwere ike ịnwe nha nha nhata n'ọtụtụ puku pound. Hama ike pere mpe, 500 lb (230 n'arọ) ma ọ bụ ihe na-eweghachi ibu na-erughị ya, na ịpị hydraulic bụ ihe nkịtị…
    GỤKWUO
  • EHF (nke ọma hydraulic forming) teknụzụ

    EHF (nke ọma hydraulic forming) teknụzụ

    Ihe na-eto eto dị n'ịmepụta ihe n'ọtụtụ ụlọ ọrụ n'ọdịnihu bụ n'ihi ihe ọhụrụ teknuzu pụtara n'ime afọ ole na ole gara aga. Otu n'ime ha bụ igwe nrụnye hydraulic na-eji teknụzụ EHF (nke ọma hydraulic forming) yana hammer linear Schuler na teknụzụ Servo Drive ...
    GỤKWUO
  • Na-aga n'ihu tupu akpụ - Na-aga n'ihu tupu akpụ usoro

    Na-aga n'ihu tupu akpụ - Na-aga n'ihu tupu akpụ usoro

    Na-aga n'ihu tupu akpụ - Na-aga n'ihu tupu akpụ usoro, na forging na-nyere a kọwaa tupu udi na otu akpụ ije. Ụfọdụ n'ime ihe ndị a na-eji tupu akpụ akpụ bụ hydraulic ma ọ bụ igwe igwe yana mpịakọta obe. Usoro na-aga n'ihu na-enye uru, especia ...
    GỤKWUO
  • Otu esi achọta ihe isi ike nke igwe anaghị agba nchara flange

    Otu esi achọta ihe isi ike nke igwe anaghị agba nchara flange

    Mbụ niile, tupu ịhọrọ akuakuzinwo bit, ka anyị lee anya na ihe bụ ihe isi ike na machining igwe anaghị agba nchara flange? Chọta ndị siri ike ihe nwere ike ịbụ nnọọ ezi, ngwa ngwa ịchọta ojiji nke drill.What bụ ihe isi ike nke. igwe anaghị agba nchara flange nhazi? Brief mkpisi...
    GỤKWUO
  • Isi ọghọm dị na mmiri dị ka quenching na jụrụ oyi maka forgings bụ:

    Isi ọghọm dị na mmiri dị ka quenching na jụrụ oyi maka forgings bụ:

    1, na-ahụkarị akụkụ nke austenitic isothermal mgbanwe eserese, ie, banyere 500-600 ℃, mmiri bụ na uzuoku film ogbo, na obi jụrụ ọsọ bụ ngwa ngwa zuru ezu, nke na-edugakarị na "adụ n'ókè" kpụrụ site. Igwe oyi na-adịghị mma na ezughị oke ọsọ oyi nke forging. Na martensitic ...
    GỤKWUO
  • Ụkpụrụ akara na njirimara nke flange

    Ụkpụrụ akara na njirimara nke flange

    The akara nsogbu nke ewepụghị welded flange bụ mgbe a na-ekpo ọkụ nke metụtara mmepụta na-eri ma ọ bụ aku na uba uru nke ụlọ ọrụ, otú akara ụkpụrụ nke flat welded flange e mma na mma na mma. Otú ọ dị, isi imewe shortcoming nke flat welded flange bụ na. ọ nweghị ike igbochi ...
    GỤKWUO
  • Ụdị adịgboroja ole dị?

    Ụdị adịgboroja ole dị?

    Dị ka okpomọkụ forging si kwuo, ọ nwere ike kewaa n'ime ọkụ na-ekpo ọkụ, ọkụ na-ekpo ọkụ na oyi na-atụ oyi. Dị ka usoro a na-emepụta si kwuo, a pụrụ kewaa ịgha n'ime free forging, die forging, rolling ring and special forging. 1. Mepee Die forging na-ezo aka na usoro igwe eji akpụ akpụ...
    GỤKWUO
  • Nchekwa okpomọkụ efu, quenching na normalize forgings

    Nchekwa okpomọkụ efu, quenching na normalize forgings

    Na okpomọkụ ọgwụgwọ nke forging, n'ihi na nnukwu ike nke ikpo ọkụ ọkụ na ogologo mkpuchi oge, ike oriri bụ nnukwu na dum usoro, na a ogologo oge nke oge, otú e si azọpụta ike na okpomọkụ ọgwụgwọ nke forging kemgbe. nsogbu siri ike. Ihe a na-akpọ "ihe mkpuchi efu ...
    GỤKWUO