Kasar Sin Dindindin Rangwamen Bututu Forge Don Polo - Silinda Masu Ƙarfafawa - DHDZ Manufacturer & Supplier

Jumla Rangwamen Bututu Forge Don Polo - Ƙarfafa Silinda - DHDZ

Jumla Rangwame Bututu Forge Don Polo - Ƙirƙirar Silinda - Hoton da aka Fitar da DHDZ

Takaitaccen Bayani:

Cikakken Bayani

Tags samfurin

Bidiyo mai alaka

Jawabin (2)

Mun dauki "abokin ciniki-abokin ciniki, ingancin-daidaitacce, hadewa, m" a matsayin makasudi. "Gaskiya da gaskiya" ita ce gwamnatinmu manufaHaɗa Zaren Flange, Pl Flange, Asme B16.36 Orifice Flanges, Quality ne factory ta rayuwa , Mayar da hankali a kan abokan ciniki 'bukatar ne tushen kamfanin tsira da kuma ci gaban, Mun bi gaskiya da kuma mai kyau bangaskiya aiki hali, sa ido ga zuwanka !

Jumla Rangwamen Bututu Forge Don Polo - Ƙarfafa Silinda - DHDZ Cikakkun:

Bude Die Forgings Manufacturer A China

RUBUTUN CYLInder

ƙirƙira-Silinda

Max. OD	Max. Tsawon	Max. Nauyi
4000mm	10000mm	Ton 30

DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.

Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da mara lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.

Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.

Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)

Abubuwan Jiki

Kayayyaki	Ma'auni	Mai mulki
Yawan yawa	7.85 g/cm 3	0.284 lb/in³
Wurin narkewa	1432°C	2610°F

AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu

AISI 4130

0.280 - 0.330

0.40 - 0.60

0.15 - 0.30

0.030 max

0.040 max

0.80-1.10

0.15-0.25

0.25

max

0.35

max

0.15-0.25

Saukewa: ASTM A29/A29M	Farashin 17350	Saukewa: G4404	GB/T 1229	ISO 683/18
AISI 4130/ G41300	1.7218/25CrMo4	Farashin SMN420	25CrMo4	25CrMo4

Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.

AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.

Girman: φ774.8 0xφ317.0XH825.5mm

Kerawa da Maganin Zafi

Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.

Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.

Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi

Ƙirƙira	1093-1205 ℃
Annealing	778-843 ℃ tanderun sanyi
Haushi	399-649 ℃
Daidaitawa	871-898 ℃ iska sanyi
Austenize	815-843 ℃ ruwa quench
Rage damuwa	552-663 ℃
Quenching	552-663 ℃

Rm - Ƙarfin ɗaure (MPa) (Q +T)	≥930
Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T)	≥785
KV - Tasirin makamashi (J) (Q +T)	+20° ≥63
A - Min. elongation a karaya (%) (Q +T)	≥12
Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T)	≥50
Taurin Brinell (HBW): (Q +T)	≤229HB

KARIN BAYANI
NEMAN MAGANA A YAU

KO KIRA: 86-21-52859349

pdf 4130

pdf Sabon-4130-Alloy-karfe

Hotuna dalla-dalla samfurin:

Jagoran Samfuri masu alaƙa:

Na'urori masu aiki da kyau, ƙungiyar ƙwararrun riba, da mafi kyawun kamfanonin tallace-tallace; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for Wholesale Discount Forge Pipe For Polo - Forged Cylinders - DHDZ , Samfurin zai wadata a duk faɗin duniya, kamar: Nigeria , Mexico, New Zealand, Me ya sa za mu iya yin waɗannan? Domin: A, Mu masu gaskiya ne kuma abin dogara. Abubuwan mu suna da inganci mai kyau, farashi mai ban sha'awa, isassun ƙarfin samarwa da cikakkiyar sabis. B, Matsayinmu na yanki yana da babban fa'ida. C, Daban-daban iri: Maraba da tambayar ku, ana iya yaba shi sosai.

1995 Ford Ranger Xlt 2.3 Lita Forge Zobba

4 Zoben Karfe Na Karfe

Tubalan ƙirƙira

Jarumi D Zobba

Ƙirƙirar Zobe Daga China

Tube Forger

Ƙirƙirar Blocks Crossword

Manyan Diamita Jarumin Zobba

Akwai Shirye-shiryen Sa350lf2 Forged Tubalan Da Rectangles

Sr20 Forged Block

Koyaushe muna yin imani cewa cikakkun bayanai sun yanke shawarar ingancin samfuran kamfanin, ta wannan yanayin, kamfanin yana biyan bukatunmu kuma kayan sun cika tsammaninmu.

By Lesley daga Swiss - 2018.09.29 13:24

Kamfanin darektan yana da matukar arziƙin gudanarwar gwaninta da ɗabi'a mai ƙarfi, ma'aikatan tallace-tallace suna da dumi da farin ciki, ma'aikatan fasaha ƙwararru ne kuma masu alhakin, don haka ba mu da damuwa game da samfur, masana'anta mai kyau.

By Judy daga Jamhuriyar Czech - 2018.09.08 17:09

Ku rubuta sakonku anan ku aiko mana