Isar da Gaggawa don #150 Ansi Sorf Flange - Ƙarfafa Silinda - DHDZ

Takaitaccen Bayani:


Cikakken Bayani

Tags samfurin

Bidiyo mai alaka

Jawabin (2)

Muna ci gaba da ka'idar "ingancin da za a fara da, goyan baya da farko, ci gaba da haɓakawa da haɓakawa don saduwa da abokan ciniki" don gudanar da ku da "lalata sifili, gunaguni na sifili" azaman maƙasudin inganci. Don haɓaka sabis ɗinmu, muna ba da abubuwan tare da duk mafi girman inganci a farashi mai ma'ana don siyarwaFarashin Flange Bakin Karfe, Gudun Vacuum Flange, Jerin Farashin Flange, Muna da zurfin hadin gwiwa tare da daruruwan masana'antu a kusa da kasar Sin. Samfuran da muke samarwa zasu iya dacewa da buƙatun ku daban-daban. Zaba mu, kuma ba za mu sa ka yi nadama!
Isar da Gaggawa don #150 Ansi Sorf Flange - Forged Silinda - DHDZ Cikakken Bayani:

Bude Die Forgings Manufacturer A China

RUBUTUN CYLInder

ƙirƙira-Silinda

Max. OD Max. Tsawon Max. Nauyi
4000mm 10000mm Ton 30

DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.

Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da mara lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.

Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4

Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.

Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)

Abubuwan Jiki

Kayayyaki Ma'auni Mai mulki
Yawan yawa 7.85 g/cm 3 0.284 lb/in³
Wurin narkewa 1432°C 2610°F

AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu

AISI 4130

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

Mo

0.280 - 0.330

0.40 - 0.60

0.15 - 0.30

0.030 max

0.040 max

0.80-1.10

0.15-0.25

0.25

max

0.35

max

0.15-0.25


Saukewa: ASTM A29/A29M

Farashin 17350

Saukewa: G4404

GB/T 1229

ISO 683/18

AISI 4130/ G41300

1.7218/25CrMo4

Farashin SMN420

25CrMo4

25CrMo4

Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.

AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.

Girman: φ774.8 0xφ317.0XH825.5mm

Kerawa da Maganin Zafi

Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.

Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.

Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi

Ƙirƙira

1093-1205 ℃

Annealing

778-843 ℃ tanderun sanyi

Haushi

399-649 ℃

Daidaitawa

871-898 ℃ iska sanyi

Austenize

815-843 ℃ ruwa quench

Rage damuwa

552-663 ℃

Quenching

552-663 ℃


Rm - Ƙarfin ɗaure (MPa) (Q +T)

≥930

Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T)

≥785

KV - Tasirin makamashi (J)

(Q +T)

+20°
≥63

A - Min. elongation a karaya (%) (Q +T)

≥12

Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T)

≥50

Taurin Brinell (HBW): (Q +T)

≤229HB

KARIN BAYANI
NEMAN MAGANA A YAU

KO KIRA: 86-21-52859349

pdf4130

pdfSabon-4130-Alloy-karfe

 


Hotuna dalla-dalla samfurin:

Isar da Gaggawa don #150 Ansi Sorf Flange - Forged Cylinders - DHDZ cikakkun hotuna


Jagoran Samfuri masu dangantaka:

Muna da namu tallace-tallace tawagar, zane tawagar, fasaha tawagar, QC tawagar da kunshin tawagar. Muna da tsauraran matakan sarrafa inganci don kowane tsari. Har ila yau, duk ma'aikatanmu sun sami gogewa a filin bugawa don Isar da Sauri don #150 Ansi Sorf Flange - Forged Cylinders – DHDZ , Samfurin zai samar wa duk faɗin duniya, kamar: Uruguay, Rasha, Ruwanda, Muna da fiye da 200 ma'aikatan da suka haɗa da ƙwararrun manajoji, masu ƙira, ƙwararrun injiniyoyi da ƙwararrun ma'aikata. Ta hanyar aiki tuƙuru na duk ma'aikata na shekaru 20 da suka gabata kansa kamfani ya ƙara ƙarfi da ƙarfi. Kullum muna amfani da ƙa'idar "abokin ciniki na farko". Har ila yau, koyaushe muna cika duk kwangiloli har zuwa ma'ana don haka muna jin daɗin kyakkyawan suna da amana tsakanin abokan cinikinmu. Kuna marhabin da ku ziyarci kamfaninmu da kanku. Muna fatan fara haɗin gwiwar kasuwanci bisa ga fa'idar juna da ci gaba mai nasara. Don ƙarin bayani don Allah kar a yi shakka a tuntube mu..
  • Kayan aikin masana'antu sun ci gaba a cikin masana'antu kuma samfurin yana aiki mai kyau, haka ma farashin yana da arha sosai, ƙimar kuɗi! Taurari 5 By Kim daga Muscat - 2017.08.16 13:39
    Kayan aikin masana'antu sun ci gaba a cikin masana'antu kuma samfurin yana aiki mai kyau, haka ma farashin yana da arha sosai, ƙimar kuɗi! Taurari 5 Zuwa Yuni daga Vietnam - 2017.05.02 18:28
    Ku rubuta sakonku anan ku aiko mana