Girman Girman Masana'antar Flange Bolt na Asalin - Ƙarfafa Silinda - DHDZ
Girman Girman Masana'antar Flange Bolt na Asalin - Ƙarfafa Silinda - DHDZ Cikakken Bayani:
Bude Die Forgings Manufacturer A China
RUBUTUN CYLInder
| Max. OD | Max. Tsawon | Max. Nauyi |
| 4000mm | 10000mm | Ton 30 |
DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.
Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da marasa lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.
Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4
Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.
Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)
Abubuwan Jiki
| Kayayyaki | Ma'auni | Mai mulki |
| Yawan yawa | 7.85 g/cm 3 | 0.284 lb/in³ |
| Wurin narkewa | 1432°C | 2610°F |
AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu
| AISI 4130 | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | Mo |
| 0.280 - 0.330 | 0.40 - 0.60 | 0.15 - 0.30 | 0.030 max | 0.040 max | 0.80-1.10 | 0.15-0.25 | 0.25 max | 0.35 max | 0.15-0.25 |
| Saukewa: ASTM A29/A29M | Farashin 17350 | Saukewa: G4404 | GB/T 1229 | ISO 683/18 |
| AISI 4130/ G41300 | 1.7218/25CrMo4 | Farashin SMN420 | 25CrMo4 | 25CrMo4 |
Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.
AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.
Girman: φ774.8 0xφ317.0XH825.5mm
Kerawa da Maganin Zafi
Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.
Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.
Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi
| Ƙirƙira | 1093-1205 ℃ |
| Annealing | 778-843 ℃ tanderun sanyi |
| Haushi | 399-649 ℃ |
| Daidaitawa | 871-898 ℃ iska sanyi |
| Austenize | 815-843 ℃ ruwa quench |
| Rage damuwa | 552-663 ℃ |
| Quenching | 552-663 ℃ |
| Rm - Ƙarfin ɗaure (MPa) (Q +T) | ≥930 |
| Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T) | ≥785 |
| KV - Tasirin makamashi (J) (Q +T) | +20° |
| A - Min. elongation a karaya (%) (Q +T) | ≥12 |
| Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T) | ≥50 |
| Taurin Brinell (HBW): (Q +T) | ≤229HB |
KARIN BAYANI
NEMAN MAGANA A YAU
KO KIRA: 86-21-52859349
4130
Sabon-4130-Alloy-karfe
Hotuna dalla-dalla samfurin:
Jagoran Samfuri masu dangantaka:
Ƙungiyarmu ta yi alkawarin duk abokan ciniki tare da samfurori na farko da mafita da kuma mafi gamsarwa sabis na tallace-tallace. We warmly welcome our regular and new clients to join us for Original Factory Flange Bolt Sizes - Forged Cylinders – DHDZ , Samfurin zai wadata a duk faɗin duniya, kamar: panama, Sudan, Victoria, Muna kula da kowane matakai na ayyukanmu , daga zaɓin masana'anta, haɓaka samfuri & ƙira, shawarwarin farashin, dubawa, jigilar kaya zuwa kasuwa. Mun aiwatar da tsayayyen tsarin kula da ingancin inganci, wanda ke tabbatar da cewa kowane samfurin zai iya biyan buƙatun ingancin abokan ciniki. Bayan haka, duk samfuranmu an bincika su sosai kafin jigilar kaya. Nasararku, Daukakarmu: Manufarmu ita ce mu taimaka wa abokan ciniki su fahimci manufofinsu. Muna yin ƙoƙari sosai don cimma wannan yanayin nasara kuma muna maraba da ku da ku tare da mu.
By Daisy daga Florida - 2017.12.09 14:01 Tare da kyakkyawan hali na "game da kasuwa, la'akari da al'ada, la'akari da kimiyya", kamfanin yana aiki sosai don yin bincike da ci gaba. Da fatan za mu sami dangantakar kasuwanci nan gaba da samun nasarar juna.
By Renee daga Zurich - 2018.06.30 17:29 Rukunin samfuran
-
Farashin farashi na 2018 Orifice Flange Asme B16 36 ...
-
Kyakkyawan Jerin Farashin Farashin Karfe Flange - Socket ...
-
Babban Mai kera don Mai kera Flange A...
-
Samar da Factory Forged Carbon Karfe Flanges - W...
-
Lissafin Farashin don Astm A105 Ansi B16.5 Wn Flanges -...
-
Lissafin Farashi mai arha don Tubalan Ƙarfafa - Ƙirƙirar Bl...
