OEM Musanta zobe ya mirgine ya ci gaba da ya ji daɗin mutu

A takaice bayanin:


Cikakken Bayani

Tags samfurin

Mai dangantaka mai dangantaka

Feedback (2)

Amfaninmu yana kashe caji, ƙungiyar kuɗin shiga, QC na musamman, masana'antu masu tsauri, ayyukan kirki na sabis donKarfe sun manta da, Haɗin PIPE, PIPE HATTINGS FASH, Muna da babban kaya don cika abokin cinikinmu yana buƙatar da buƙatun.
OEM Aka tsara Tsarkakewa Murmushi ya buɗe ya mutu - Tsara Silinders - Cikakkun Bayani:

Buɗe Die Muryararren Manufacturer a China

Zaben Silinda

ƙirƙira-silinda

Max. Od Max. Tsawo Max. Nauyi
4000mm 10 000mm 30 tan

Dhdz masana'anta backlesed fored, silin bango na katako mai nauyi da hannayen riga da hannayen da aka tsara a matsayin bukatun abokin ciniki kamar yadda ake buƙata na abokin ciniki. Abubuwan da baless da ke fama da kwari suna da kyau don aikace-aikacen canji da kuma mahalli maza saboda tsadar su, ƙarfi da juriya na lalata. Hollows za'a iya samar da shi ba kawai a cikin tsarin siliki ba, amma tare da bambancin marasa iyaka na ods da ID, gami da Tapers.

Bugu da ƙari dhdz yana ba da duk aikin sarrafawa har da magani mai zafi, injinan da na inji da gwaji na inji da rashin lalacewa, bayan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddenku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da ƙarfinmu don rage sharar gida da rage aiwatar da abubuwan banza.

Kayan aiki na kowa: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42crmo4 | 1.7225 | 34cralni7 | S355j2 | 30 | 22Nnrmrmrev| En 1.42201 | 42CMO4

Shanxi Gagun Winder Flange Mashoring Co., LTD., A matsayin mai sanya ƙaho mai ridaka, ko kuma sanduna da ke tattare da abubuwan da suka dace da kayan aikin injiniyoyi ko kuma suka lalata kayan aikin.

Case: Karfe Saura Aisi 4130 Aloyoy Karfe (UnNoy G41300)

Properties na jiki

Kaddarorin Awo M
Yawa 7.85 g / cm3 0.284 lb / A³
Mallaka 1432 ° C 2610 ° F

AISI 4130 alloy Karfe Bayani mai dacewa da daidaito

Aiisi 4130

C

Mn

Si

P

S

Cr

Mo

Ni

Cu

Mo

0.280 - 0.330

0.40 - 0.60

0.15 - 0.30

0.030 Max

0.040 Max

0.80-1.10

0.15-0.2

0.25

max

0.35

max

0.15-0.2


Astm A29 / A29m

Din17350

Jis G4404

GB / t 1229

ISO 683/18

Aisi 4130 / g41300

1.7218 / 25crmo4

SMN 420

25crmo4

25crmo4

Aikace-aikace
Wasu yankunan aikace-aikace na yau da kullun don Aisi 4130:
Masana'antar mai da gas - kamar yadda gawawwakin bawul din da farashinsa
Jirgin saman kasuwanci, injin jirgin sama yana hawa
Jirgin ruwan soja
Mayarwa
Kayan aikin injin
Kayan Kayan Hydraulic
Racing
Saidospace
Masana'antu da masana'antu da tsaro da sauransu.

AISI 4130 ƙirƙira silinda, low alloy karfe don masana'antar mai da gas.

Girma: %%% 0xφ 0xy.h825mm

Magani da magani mai zafi

Machincin - Aisi 4130 Malled Malled ta amfani da hanyoyin al'ada. Koyaya, inji ya zama da wahala lokacin da wuya na karfe yana ƙaruwa.

Samar da AISI 4130 Karfe za'a iya yi a yanayin da aka yi.
● Welding na AISI 4130 mata za a iya yin ta duk hanyoyin kasuwanci.
Jiyya mai zafi - AISI 4130 Karfe mai zafi a 871 ° C (1600 ° F) sannan ya yi quenched a cikin mai. Wannan karfe mafi yawa ana kula da zafi a yanayin zafi daga 899 zuwa 927 ° C (1650 zuwa 1700 ° F).
Mon gyarwar AISI 4130 Za a iya yin karfe a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
Ana iya yin aiki mai zafi na Aisi 4130 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● Aisi 4130 Karfe Zai Iya Yin Aiki ta Amfani da Hanyoyin al'ada.
● Aishi 4130 baƙi za a iya tantance a 843 ° C (1550 ° F) ya biyo bayan sanyaya iska a 482 ° C (900 ° F).
● Za a iya yin hyper na Aisi 4130 zuwa 569 zuwa 566 ° C (750 zuwa 1050 ° F), gwargwadon matakin ƙarfin da ake so.
Indinging of Aisi 4130 Za a iya yi karfe tare da sanyi aiki ko magani mai zafi.
Wasu manyan aikace-aikacen Aisi 4130 alloy karfe suna cikin injin jirgin sama da ke hawa da kuma walwalwar tubing.

Matar (aikin zafi) aikin, tsarin magani mai zafi

Kagaji

1093-1205 ℃

Shafewa

778-843 ℃ tnunce Cool

Saitawa

399-649 ℃

M

871-898 ℃ Air Air

Austeniz

815-843 ℃ Ruwan ruwa Quench

Saurin damuwa

552-663 ℃

Sauka

552-663 ℃


RM - Tengy ƙarfi (MPa) (Q + T)

≥930

RP0.2 0.2% tabbaci (MPa) (Q + T)

≥785

KV - Ingancin Kuzari (J)

(Q + t)

+ 20 °
≥63

A - min. Elongation a karaya (%) (q + t)

≥12

Z - Ragewa a sashin giciye akan karaya (%) (n + Q + t)

≥50

Bratinell Hardness (HBW): (Q + t)

≤229hb

Informationarin bayani
Neman wata magana a yau

Ko kira: 86-21-52859349

pdf4130

pdfSabuwar-4130-Alloy-Karfe

 


Cikakken hotuna:

OEM Aka tsara Tsarkakewa Rolling Rolling ya buɗe mutu mutu mutu ya manta - DHDZ Clifilecials - Hillight


Jagorar samfurin mai alaƙa:

Mun yi imani cewa kariyar lokaci na tsawon lokacin da ake samu na sama da kewayon zobe, Guyz, samfurin zai wadatar a cikin masana'antarmu. Kungiyoyin Injiniyanmu zasu kasance a shirye don bautar da ku don tattaunawa da martani. Mun sami damar samar muku da samfuran tsada don biyan bukatunku. Za a samar da mafi kyawun kokarin da za a samar muku da mafi kyawun sabis da mafita. Don duk wanda yake tunanin kasuwancinmu da mafita, da fatan za a yi mana ta aika mana imel ko kuma tuntuɓarmu nan da nan. A matsayin hanyar sanin abubuwanmu da kamfaninmu. Yawancin kuma, zaku iya zuwa masana'antarmu don gano shi. Za mu yi maraba da baƙi a kullun daga duniya zuwa ga kamfaninmu. o gina kamfani. tations tare da mu. Ya kamata ku ji daɗin samun cikakken kyauta don tuntuɓar mu don ƙaramar kasuwanci kuma mun yi imani za mu raba ƙwarewar sana'a tare da duk 'yan kasuwantungiyoyinmu.
  • Daraktan kamfanin yana da ƙwarewar gudanarwa mai kyau, ma'aikatan siyarwa suna da daɗi, masu fasaha sune ƙwararru da masu kulawa, don haka ba mu damu da samfurin ba, mai kyakkyawan masana'anta. 5 taurari By Deborah daga Kyrgyzstan - 2017.05.02 11:33
    Mu karamin kamfani ne da aka fara, amma mun sami hankalin shugaban kamfanin kuma mu ba mu taimako mai yawa. Fatan zamu iya samun ci gaba tare! 5 taurari Ta Clara daga Benin - 2018.09.16 11:31
    Rubuta sakon ka a nan ka aika da shi