Tushen masana'anta Forged Round Bar Stockist - Forged Cylinders - DHDZ
Tushen masana'anta Jarumi Round Bar Stockist - Forged Cylinders - DHDZ Cikakkun bayanai:
Bude Die Forgings Manufacturer A China
FORGED CYLInder
| Max. OD | Max. Tsawon | Max. Nauyi |
| 4000mm | 10000mm | Ton 30 |
DHDZ yana ƙera ƙirƙira maras sumul, manyan silinda mara nauyi na bango da hannayen riga a cikin nau'ikan jeri na musamman kamar kowane buƙatun abokin ciniki. Ramin jabun da ba su da ƙarfi sun dace don aikace-aikacen matsananciyar damuwa da matsananciyar yanayi saboda ƙarfinsu, ƙarfinsu da juriya na lalata. Za a iya samar da ramuka ba kawai a madaidaiciyar siffar silinda ba, amma tare da bambance-bambancen OD da ID marasa iyaka, gami da tapers.
Bugu da ƙari, DHDZ yana ba da duk sarrafa ƙasa da suka haɗa da maganin zafi, injina da gwajin inji da marasa lalacewa, kan buƙata. Tuntube mu a yau tare da ainihin ƙayyadaddun bayanan ku, ƙungiyarmu za ta yi aiki tare da ku don yin amfani da damarmu don rage sharar kayan aiki da rage ƙarancin tsari.
Abubuwan da aka saba amfani da su: 1045 | 4130 | 4140 | 4340 | 5120 | 8620 |42CrMo4 | 1.7225 | 34CrAlNi7 | S355J2 | 30NiCrMo12 | 22NiCrMoV| EN 1.4201 | 42CrMo4
Shanxi DongHuang Wind Power Flange Manufacturing Co., LTD., A matsayin ISO ƙwararren ƙirƙira ƙirƙira, yana ba da garantin cewa jabun da / ko sanduna sun yi kama da inganci kuma ba su da abubuwan da ba su da lahani waɗanda ke da illa ga kaddarorin injin ko kayan aikin injin.
Case: Karfe Grade AISI 4130 Alloy Karfe (UNS G41300)
Abubuwan Jiki
| Kayayyaki | Ma'auni | Mai mulki |
| Yawan yawa | 7.85 g/cm 3 | 0.284 lb/in³ |
| Wurin narkewa | 1432°C | 2610°F |
AISI 4130 Alloy Karfe Mahimman Bayanai da Kwatankwacinsu
| AISI 4130 | C | Mn | Si | P | S | Cr | Mo | Ni | Cu | Mo |
| 0.280 - 0.330 | 0.40 - 0.60 | 0.15 - 0.30 | 0.030 max | 0.040 max | 0.80-1.10 | 0.15-0.25 | 0.25 max | 0.35 max | 0.15-0.25 |
| Saukewa: ASTM A29/A29M | Farashin 17350 | Saukewa: G4404 | GB/T 1229 | ISO 683/18 |
| AISI 4130/ G41300 | 1.7218/25CrMo4 | Farashin SMN420 | 25CrMo4 | 25CrMo4 |
Aikace-aikace
Wasu yankunan aikace-aikace na AISI 4130:
Masana'antar mai da iskar gas - a matsayin jikkunan bawul da famfo
Jirgin sama na kasuwanci, injin jirgin sama yana hawa
Jirgin soja
Motoci
Kayan aikin inji
Kayan aikin hydraulic
Wasan mota
Jirgin sama
Masana'antar noma da tsaro da dai sauransu.
AISI 4130 Forged Silinda, Ƙarfe Ƙarfe Ƙarfe don masana'antun mai da gas.
Girman: φ774.8 0xφ317.0XH825.5mm
Kerawa da Maganin Zafi
Machinability - AISI 4130 karfe za a iya sauƙaƙe ta amfani da hanyoyin al'ada. Koyaya, mashin ɗin yana zama da wahala lokacin da ƙarfin ƙarfe ya ƙaru.
Samar da ƙarfe na AISI 4130 ana iya yin shi a cikin yanayin da ba a taɓa gani ba.
● Welding na AISI 4130 karfe za a iya yi ta duk hanyoyin kasuwanci.
● Maganin zafi - AISI 4130 karfe yana zafi a 871 ° C (1600 ° F) sannan a kashe shi a cikin mai. Wannan karfe yawanci ana yin zafi ne a yanayin zafi daga 899 zuwa 927°C (1650 zuwa 1700°F).
● Ƙirƙirar karfe na AISI 4130 za a iya yi a 954 zuwa 1204 ° C (1750 zuwa 2200 ° F).
● Za a iya yin aiki mai zafi na AISI 4130 karfe a 816 zuwa 1093 ° C (1500 zuwa 2000 ° F).
● AISI 4130 karfe na iya zama sanyi aiki ta amfani da hanyoyin al'ada.
● AISI 4130 karfe za a iya annealed a 843 ° C (1550 ° F) sa'an nan iska sanyaya a 482 ° C (900 ° F).
● Za a iya yin zafi na AISI 4130 karfe a 399 zuwa 566 ° C (750 zuwa 1050 ° F), dangane da ƙarfin ƙarfin da ake so.
● Hardening na AISI 4130 karfe za a iya yi tare da sanyi aiki ko zafi magani.
Wasu daga cikin manyan aikace-aikace na AISI 4130 gami da karfe suna cikin injin injin jirgin sama da bututun walda.
Ƙirƙirar (Aiki mai zafi) Ƙarfafa , Tsarin Maganin zafi
| Ƙirƙira | 1093-1205 ℃ |
| Annealing | 778-843 ℃ tanderun sanyi |
| Haushi | 399-649 ℃ |
| Daidaitawa | 871-898 ℃ iska sanyi |
| Austenize | 815-843 ℃ ruwa quench |
| Rage damuwa | 552-663 ℃ |
| Quenching | 552-663 ℃ |
| Rm - Ƙarfin ɗaure (MPa) (Q +T) | ≥930 |
| Rp0.2 0.2% ƙarfin hujja (MPa) (Q +T) | ≥785 |
| KV - Tasirin makamashi (J) (Q +T) | +20° |
| A - Min. elongation a karaya (%) (Q +T) | ≥12 |
| Z - Ragewa a ɓangaren giciye akan karaya (%)(N+Q +T) | ≥50 |
| Taurin Brinell (HBW): (Q +T) | ≤229HB |
KARIN BAYANI
NEMAN MAGANA A YAU
KO KIRA: 86-21-52859349
4130
Sabon-4130-Alloy-karfe
Hotuna dalla-dalla samfurin:
Jagoran Samfuri masu dangantaka:
Mun dage akan samar da ingantaccen samarwa tare da kyakkyawan ra'ayi na kasuwanci, tallace-tallace na gaskiya da mafi kyawun sabis da sauri. zai kawo muku ba kawai samfurin inganci da riba mai yawa ba, amma mafi mahimmanci shine ku mamaye kasuwa mara iyaka don tushen Factory Forged Round Bar Stockist - Forged Cylinders – DHDZ , Samfurin zai wadata ga duk faɗin duniya, kamar: Pakistan, Bandung, Nigeria, Bayan shekaru masu tasowa da haɓakawa, tare da fa'idodin ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun tallace-tallace an sami nasarori a hankali. Muna samun suna mai kyau daga abokan ciniki saboda ingancin mafitarmu mai kyau da sabis na bayan-sayar. Muna matukar fatan samar da makoma mai wadata da walwala tare da dukkan abokai na gida da waje!
Daga Eileen daga Zurich - 2018.06.26 19:27 Halin ma'aikatan sabis na abokin ciniki yana da gaskiya sosai kuma amsar ta dace kuma dalla-dalla, wannan yana da matukar taimako ga yarjejeniyar mu, na gode.
By Maryama daga Alkahira - 2018.09.08 17:09 Rukunin samfuran
-
Farashi maras tsada don masu kera zobe na jabu a...
-
OEM Factory for Karfe Flange Bayani dalla-dalla - ...
-
Farashin Jumla Ƙarfe Flanges - Ori...
-
Factory Cheap Hot 2 pcs Flanges - Long Weld Ne...
-
2019 wholesale farashin High Quality Karfe Karfe ...
-
OEM Musamman Factory Custom Made Forging Mold ...
