Socket Weld Forged Flange Fabrikant yn Sina

Socket Weld Forged Flanges Fabrikant yn Shanxi en Shanghai, Sina
De socket weld flange ferwiist nei in flange dat wurdt ynfoege yn de flange ring stap oan 'e ein fan' e piip en laske oan de piip ein en de bûtenkant. D'r binne twa soarten nekke en gjin nekke. It stiel mei de hals flange hat goede rigidity, lytse welding deformation en goede sealing prestaasjes, en kin brûkt wurde foar gelegenheid fan de druk fan 1.0 ~ 10.0MPa. De B-flens foar konteners is ek in socket weld flange foar tapassingen dêr't sealing easken binne heech. By it ûntwerpen kin de socket weld flange wurde kontrolearre troch yntegraal flange.

Grutte
Socket Weld Flange Grutte: 1/2"-160"
DN10~DN4000

Facing
Flat Face Full Face (FF), Raised Face (RF), Male Face (M), Female Face (FM), Tongue Face (T), Groove Face (G), Ring Joint Face (RTJ / RJ).

Oerflak / Coating Behanneling
Anti-rustferve, oalje swarte ferve, giel transparant, sink plated, kâld en waarm dip galvanisearre, gouden lakfinish.

International Standard Flanges DHDZ biedt:

Amerikaanske Standert
ANSI B16.5
Drukklasse: 150~1200
Grutte: 1/2"-24"

ASME B16.5
Drukklasse 150~1200
Grutte: 1/2"-24"

ASME B16.47A
Drukklasse 150~900
Grutte: 1/2"-24"

ASME B16.47B
Drukklasse 75~900
Grutte: 26"-60"

ANSI B16.1
Orifice Union B16.36
MSS-SP-44
API
AWWA
Type
Lashals, Slip op, Threaded, Lap joint,
Socket weld, Blind, Orifice, Brilleblind

Dútske Standert
DIN
Druk PN6~PN400
Grutte DN10~DN4000
Type
DIN 2527-Blind; PN~PN100
DIN 2566-Screwed: PN10 en PN16
DIN 2573 PN6
DIN 2576 PN10
DIN 2627 PN400
DIN 2628 PN250
DIN 2629 PN320
DIN 2630 PN1 en PN2.5
DIN 2631 PN6
DIN 2632 PN10
DIN 2633 PN16
DIN 2634 PN25
DIN 2635 PN40
DIN 2636 PN64
DIN 2637 PN100
DIN 2638 PN160
DIN 2641 PN6
DIN 2642 PN10
DIN 2655 PN25
DIN 2656 PN40

Afrikaanske Standert
Standert
SABS 1123
Druk 250kpa~6400kpa
Grutte: DN10~ DN3600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Australyske Standert
Standert
AS 2129
Tabel: T/A, T/D, T/E, T/F, T/H,
T/J, T/K, T/R, T/S, T/T,
Grutte: DN15~ DN3000

AS 4087
Druk PN16~PN35
Grutte: DN50~ DN1200
Type
Blind, Plaat, Welding nekke, Baas

Kanadeeske Standert
Standert
CSA Z245.12
Druk PN20~PN400
Grutte: NPS 1/2"-60"

Japanske standert
Standert
JIS B2220
Druk 5K ~ 30K
Grutte: DN10~ DN1500
Type
Slip op plaat, Slip op hub, Socket welding, Welding hals, Lap joint, Threaded, Blind, Yntegraal

Europeeske Standert
Standert
EN 1092-1
Druk PN6~PN100
Grutte: DN10~ DN4000
Type
Plaat, Losse plaat, Blind, Welding hals, Hubbed slip op, Hubbed threaded

Britske Standert
Standert
BS 4504
Druk PN2.5~PN40
Grutte: DN10~ DN4000
BS 10
Tabel: T/A, T/D, T/E, T/F, T/H
Druk PN2.5~PN40
Grutte: 1/2 ~ 48"
Type
Plaat, Los, Lashals, Blind,
Hubbed slip op, Hubbed threaded
Yntegraal, Plain

Frânsk Standert
Standert
NFE 29203
Druk PN2.5~PN420
Grutte: DN10~ DN600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Itaalje Standert
Standert
UNI 2276-2278
Druk PN6~PN40
Grutte: DN10~ DN600
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Ruslân Standert
Standert
GOST 1281
Druk PN15~PN2000
Grutte: DN10~ DN2400
Type
Blind, Plaat, Lashals, Los,
Yntegraal, Slip op

Sineeske Standert
Standert
GB9112-2000
GB9113-2000~GB9123-2000
JB81-94～JB86-94, JB/T79-94～JB/T86-94
JB4700-2000～JB4707-2000, SH501-1997
GB/T11694-94, GB/T3766-1996, GB/T11693-94, GB10746-89, GB/T4450-1995, GB/T11693-94, GB2506-2005, CBM1012-81, CBM1012-81
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406
Druk 0.25MPa~10Mpa
Grutte: DN10~ DN1200
Type
Blind, Plaat, Lashals, Lap joint, Slip on,
Threaded, Lange welding hals
MSS-SP-44
API
AWWA
DIN
EN 1092-1
BS4504
GOST
AFNOR NF EN 1759-1
NEF
UNI
JIS
SABS 1123
ISO 7005-1
AS 2129
GB/T 9112
GB/T9117
HG/T 20592
HG/T 2061
SH/T 3406

Materialen brûkt troch DHDZ:
CARBON STEEL - ASTM/ASME SA-105, SA-105N, A-350 LF-2, LF-3, A694, SA-516-70, A36
STAINLESS STEEL - ASTM/ASME A182 Gr F304 , A182 Gr F304H, A182 Gr F304L, A182 Gr F304N, A182 Gr F304LN, A182 Gr F316, A182 Gr F316L, A1682 Gr A161N, A162N Gr F304N, A182 Gr F304LN Gr F316Ti, A182 Gr F321, A182 Gr F321H, A182 Gr F347, A182 Gr F347H, A182 Gr F317, A182 Gr F317L, 309 310, 310H, 904L
Duplex - F-51
ALLOY STEEL: A-182-F-1, F-5, F-6, F-9, F-11, F-12, F-22

Fabrikant, eksporteur en leveransier fan ASME / ANSI B16.5 koalstofstaal lashalsflens, roestfrij stiel weldhalsflens, legere stiel weldhalsflens, ASTM A105 / A105N, A350 LF1, LF2 CL1 / CL2, A694 F42, F46, F48 F50, F52, F56, F60, F70, A516.60,65,70. WNRF Flanges Fabrikant yn Shanxi.

A182 Gr F304 Socket Weld Flens, A182 Gr F 304L Weld Neck Flange, A182 Gr F316 Weld Neck Flange, A182 Gr F316L Weld Neck Flange Fabrikant, A182 Gr F316Ti Weld Neck, A182 Gr F321 Weld Neck Flange, A182 Weld Flange N482 Halsflens, ASTM A182 F5 Weld Neck Flange leveransier, ASTM A182 F9 Weld Neck Flange, WNRF Flanges Exporter In Shanxi, ASTM A182 F11 Weld Neck Flange leveransiers, ASTM A182 F12 Weld Neck Flanges, ASTM A182 F282 Flanges A182 Flange Halsflens, ASTM A350 LF2 Weld Neck Flange, ASTM A350 LF3 Weld Neck Flange, ASTM A350 LF6 Weld Neck Flange Fabrikant yn Shanxi en Shanghai.

Wy DHDZ produsearje smeid flenzen dy't foldogge oan ynternasjonale kwaliteitsstandert: DIN, EN1092-1, BS4504, ANSI, API, MSS, AWWA, UNI, JIS, SANS, GOST, NFE, ISO, AS, ensfh. Wy DHDZ produsearje 75 lbs, 150lbs , 300lbs, 600lbs, 900lbs, 1500lbs, 2500lbs, PN6, PN10, PN25, PN40, PN63, PN64, PN100, GOST 12820 en GOST 12821, PN0.6 MPA, PN1.0 MPA, PN1.6 MPA, PN2.5MPA PN3, SABS10MPA PN3, SABS10MPA PN3, SABS10MPA 3, SABS10MPA PN4, SABS10MPA PN4. 600kpa, 1000kpa, 1600kpa, 2500kpa, 4000kpa flenswurdearrings neffens spesifikaasje fan keaper. Weld Neck Flange Fabrikant yn Sina - Skilje: 86-21-52859349 Stjoer Mail:dhdz@shdhforging.com

Soarten flenzen: WN, Threaded, LJ, SW, SO, Blind, LWN,
● Weld Neck Forged Flanges
● Threaded Forged Flanges
● Lap Joint Forged Flange
● Socket Weld Forged Flange
● Slip On Forged Flange
● Blind Forged Flange
● Lange Weld Neck Forged Flange
● Orifice Forged Flanges
● Spectacle Forged Flanges
● Los Forged Flange
● Plate Flange
● Flat Flange
● Oval Forged Flange
● Wind Power Flange
● ForgedTube Sheet
● CUSTOM Forged Flange